The Synchro,transmitter, cataloged under National Stock Number 5990-00-964-4093, is classified within Federal Supply Class 5990 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Sae International Dba Sae International. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 11 commercial cross-references from 5 manufacturers, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5990-00-964-4093 |
| Primary Part Number | M20708/6-01C |
| Item Name | Synchro,transmitter |
| FSC / FSG | 5990 / 59 — No Item Name Available |
| Manufacturer | Sae International Dba Sae International |
| Status | CANCELLED |
| Alignment Hole Quantity | 4 |
| Shaft Thread Length | 0.1900 INCHES NOMINAL SINGLE SHAFT IN |
| Alignment Hole Depth | 0.1250 INCHES MINIMUM IN |
| Electrical Error Angular Range in Minutes | -7.0 TO 7.0 |
| Body Style | STANDARD ROUND C |
| Shoulder Diameter | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM IN |
| Pilot Diameter | 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN |
| Flange Diameter | 1.0570 INCHES MINIMUM AND 1.0620 INCHES MAXIMUM IN |
| Undercut Width | 0.0620 INCHES NOMINAL IN |
| Flange Thickness | 0.0930 INCHES NOMINAL IN |
| Undercut Diameter | 0.9750 INCHES NOMINAL IN |
| Body Material | STEEL CORROSION RESISTING |
| Pilot Length | 0.0420 INCHES NOMINAL IN |
| Shaft Nominal Thread Size | 0.190 INCHES SINGLE SHAFT IN |
| Zss Impedance Angle in Deg | 17.00 MINIMUM AND 24.00 MAXIMUM |
| Alignment Hole Bolt Circle Diameter | 0.8120 INCHES NOMINAL IN |
| Shaft Thread Class | 2A SINGLE SHAFT A |
| Mounting Surface to Terminal End Distance | 2.3560 INCHES NOMINAL IN |
| Shaft Length | 0.5620 INCHES NOMINAL SINGLE SHAFT IN |
| Shaft Diameter | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM SINGLE SHAFT IN |
| Maximum Temp Rise | 20.0 CELSIUS DEGC |
| Actuator Friction Torque at Plus 25 Deg Celsius | 0.07 INCH-OUNCES MAXIMUM IN |
| Spline Tooth Quantity | 21 SINGLE SHAFT |
| Specification/standard Data | 81349-MIL-S-20708/6 GOVERNMENT SPECIFICATION |
| Transformation Ratio | 0.454 ROTOR TO STATOR NOMINAL |
| Body Size | 11 |
| Phase Shift Angle in Deg | 4.000 INPUT TO OUTPUT NOMINAL |
| Shaft Type | SPLINE W/THREADS SINGLE SHAFT |
| Test Data Document | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 26V11TX4C/6-01C | Moog Inc. (USA) |
| M20708/6-01C PRIMARY | Sae International Dba Sae International (USA) |
| M20708/6-06C | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| SAE-AS20708/6 | Sae International Dba Sae International (USA) |
| MILS20708-6 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| M20708-6D001 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 26V11TX4C | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| AS20708/6 | Sae Customer Service Dept 2045 (USA) |
| M20708/6-001 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| M20708/6-01C | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 2193006 | Naval Sea Systems Command (USA) |
NSN 5990-00-964-4093 is a Synchro,transmitter, manufactured by Sae International Dba Sae International, classified under FSC 5990 (No Item Name Available). Status: cancelled.
NSN 5990-00-964-4093 has 11 cross-referenced part numbers: 26V11TX4C/6-01C (Moog Inc.), M20708/6-01C (Sae International Dba Sae International), M20708/6-06C (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), SAE-AS20708/6 (Sae International Dba Sae International), MILS20708-6 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M) and 6 more.
There are 2 known substitutes for 5990-00-964-4093: 5990-00-170-4239, 5990-01-032-0710. Verify interchangeability with system specifications before substitution.
Key specifications for M20708/6-01C: Alignment Hole Quantity: 4; Shaft Thread Length: 0.1900 INCHES NOMINAL SINGLE SHAFT IN; Alignment Hole Depth: 0.1250 INCHES MINIMUM IN; Electrical Error Angular Range in Minutes: -7.0 TO 7.0. 30 total characteristics are documented in the Federal Logistics Information System.
NSN 5990-00-964-4093 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.