The Switch,sensitive, cataloged under National Stock Number 5930-01-254-0938, is classified within Federal Supply Class 5930 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 24 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-01-254-0938 |
| Primary Part Number | MIL-S-8805 |
| Item Name | Switch,sensitive |
| FSC / FSG | 5930 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Nominal Thread Size | 0.469 INCHES IN |
| Specification/standard Data | 96906-MS21320 GOVERNMENT STANDARD |
| Terminal Type and Quantity | 8 WIRE LEAD |
| Actuator Movement | 15.0 PRETRAVEL DEGREES NOMINAL AND 30.0 OVERTRAVEL DEGREES NOMINAL AND 10.0 DIFFERENTIAL DEGREES MAXIMUM |
| Actuator Roller Width | 0.310 INCHES NOMINAL IN |
| Mounting Method | THREADED BUSHING |
| Maximum Voltage Rating in Volts | 28.0 DC |
| Contact Load Current Rating at Maximum Rated Voltage | 15.000 AMPERES RESISTIVE DC AND 10.000 AMPERES INDUCTIVE DC AND 5.000 AMPERES MOTOR DC |
| Actuator Height | 1.280 INCHES NOMINAL IN |
| Inclosure Type | FULLY INCLOSED |
| Thread Quantity Per Inch | 32 |
| Actuator Length | 1.500 INCHES NOMINAL IN |
| Switch Release Force | 128.0 INCH-OUNCES MINIMUM IN |
| Hazardous Locations/environmental Protection | CORROSION RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT |
| Actuator Roller Diameter | 0.750 INCHES NOMINAL IN |
| Actuator Style | ROLLER ARM |
| Housing Length | 2.820 INCHES MAXIMUM IN |
| Test Data Document | 81349-MIL-S-8805 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Housing Diameter | 1.530 INCHES MAXIMUM IN |
| Switch Actuating Force | 192.0 INCH-OUNCES MINIMUM AND 400.0 INCH-OUNCES MAXIMUM IN |
| Body Style | BUSHING MOUNTED |
| Thread Series Designator | UNS |
| Housing Bushing Length | 0.340 INCHES NOMINAL IN |
| Nonpile-Up Contact Arrangement | 2 TWO CIRCUIT, DOUBLE BREAK/DOUBLE MAKE, ONE POSITION MOMENTARY SINGLE SWITCH UNIT |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-S-8805 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-PRF-8805/48 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MS21320-8 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| MS21320-8 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5930-01-254-0938 is a Switch,sensitive, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5930 (No Item Name Available). Status: active.
NSN 5930-01-254-0938 has 4 cross-referenced part numbers: MIL-S-8805 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-PRF-8805/48 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MS21320-8 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M), MS21320-8 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 12 known substitutes for 5930-01-254-0938: 5930-00-044-4144, 5930-00-067-4468, 5930-00-230-2561 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-S-8805: Nominal Thread Size: 0.469 INCHES IN; Specification/standard Data: 96906-MS21320 GOVERNMENT STANDARD; Terminal Type and Quantity: 8 WIRE LEAD; Actuator Movement: 15.0 PRETRAVEL DEGREES NOMINAL AND 30.0 OVERTRAVEL DEGREES NOMINAL AND 10.0 DIFFERENTIAL DEGREES MAXIMUM. 26 total characteristics are documented in the Federal Logistics Information System.