The Switch,sensitive, cataloged under National Stock Number 5930-00-468-2759, is classified within Federal Supply Class 5930 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Honeywell International Inc. Dba Honeyweel Sensing & Controls. Government technical data includes 22 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 7 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5930-00-468-2759 |
| Primary Part Number | 32EN11-6 |
| Item Name | Switch,sensitive |
| FSC / FSG | 5930 / 59 — No Item Name Available |
| Manufacturer | Honeywell International Inc. Dba Honeyweel Sensing & Controls |
| Status | ACTIVE |
| Actuator Roller Width | 0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN |
| Inclosure Type | FULLY INCLOSED |
| Body Diameter | 1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN |
| Hazardous Locations/environmental Protection | WATERTIGHT |
| Actuator Style | ROLLER ARM |
| Thread Quantity Per Inch | 32 |
| Actuator Length | 1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN |
| Terminal Type and Quantity | 6 WIRE LEAD |
| Contact Load Current Rating at Maximum Rated Voltage | 10.000 AMPERES RESISTIVE DC AND 6.000 AMPERES INDUCTIVE DC AND 6.000 AMPERES MOTOR DC |
| Thread Series Designator | UNS |
| Switch Release Force | 64.0 INCH-OUNCES MINIMUM IN |
| Nonpile-Up Contact Arrangement | 2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY SINGLE SWITCH UNIT |
| Test Data Document | 81349-MILS8805 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Switch Actuating Force | 192.0 INCH-OUNCES MINIMUM AND 400.0 INCH-OUNCES MAXIMUM IN |
| Actuator Height | 0.927 INCHES MINIMUM AND 0.967 INCHES MAXIMUM IN |
| Maximum Voltage Rating in Volts | 28.0 DC |
| Bushing Length | 0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN |
| Body Length | 2.800 INCHES MINIMUM AND 2.840 INCHES MAXIMUM IN |
| Actuator Roller Diameter | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN |
| Body Style | BUSHING MOUNTED |
| Mounting Method | THREADED BUSHING |
| Nominal Thread Size | 0.469 INCHES IN |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 32EN11-6 | Honeywell International Inc. Dba Honeyweel Sensing & Controls (USA) |
| MS21320-3 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MS21320-3 | Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M |
| MILS8805-48 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-PRF-8805/48 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5930-00-468-2759 is a Switch,sensitive, manufactured by Honeywell International Inc. Dba Honeyweel Sensing & Controls, classified under FSC 5930 (No Item Name Available). Status: active.
NSN 5930-00-468-2759 has 5 cross-referenced part numbers: 32EN11-6 (Honeywell International Inc. Dba Honeyweel Sensing & Controls), MS21320-3 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MS21320-3 (Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M), MILS8805-48 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-PRF-8805/48 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 7 known substitutes for 5930-00-468-2759: 5930-00-134-5262, 5930-00-404-9178, 5930-00-957-0306 and 4 more. Verify interchangeability with system specifications before substitution.
Key specifications for 32EN11-6: Actuator Roller Width: 0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN; Inclosure Type: FULLY INCLOSED; Body Diameter: 1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN; Hazardous Locations/environmental Protection: WATERTIGHT. 22 total characteristics are documented in the Federal Logistics Information System.