The Fuseholder,extractor Post, cataloged under National Stock Number 5920-00-926-7517, is classified within Federal Supply Class 5920 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Southwest Research Institute. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 15 commercial cross-references from 11 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5920-00-926-7517 |
| Primary Part Number | 2884-22-040-01 |
| Item Name | Fuseholder,extractor Post |
| FSC / FSG | 5920 / 59 — No Item Name Available |
| Manufacturer | Southwest Research Institute |
| Status | CANCELLED |
| Mounting Hole Quantity | 1 |
| Bushing Thread Length | 0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN |
| Overall Diameter | 0.920 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN |
| Resistor Rating | 330.0 OHMS |
| Environmental Protection | DRIPPROOF |
| Fuse Accommodation Quantity | 1 |
| Surface Treatment | SOLDER AND TIN TERMINAL |
| Bushing Diameter | 0.625 INCHES NOMINAL IN |
| Accommodated Ferrule Diameter | 0.250 INCHES NOMINAL IN |
| Material | PLASTIC DIALLYL PHTHALATE AND GLASS BODY |
| Current Carrying Rating in Amps | 20.0 |
| Interruption Indicator Method | INCANDESCENT LAMP |
| Fuse Terminal Type Accommodated | FERRULE |
| Bushing Hole Diameter | 0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Voltage in Volts | 250.0 |
| Accommodated Fuse Length | 1.250 INCHES NOMINAL IN |
| Flatted Side Bushing Hole Length | 0.570 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN |
| Specification/standard Data | 81349-MIL-F-19207/9 GOVERNMENT SPECIFICATION |
| Material Document and Classification | MIL-M-19833, TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE BODY |
| Surface Treatment | SILVER CONTACT |
| Length From Front Protrusion to Mounting Surface | 0.820 INCHES MINIMUM AND 0.860 INCHES MAXIMUM IN |
| Precious Material | SILVER |
| Mounting Hole Style | BUSHING MOUNTING |
| Precious Material and Location | CONTACT SURFACES SILVER |
| Test Data Document | 81349-MIL-F-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Terminal Type and Quantity | 2 TAB, SOLDER LUG |
| Body Style | BUSHING MOUNTED TYPE |
| Indicating Lamp Voltage Range in Volts | +23.0 TO 33.0 |
| Surface Treatment Document and Classification | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE CONTACT |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 2884-22-040-01 | Southwest Research Institute (USA) |
| 5M.4851.220.21 | Hensoldt Sensors Gmbh Div Seps (DEU) |
| FHL18G2-2 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| FHL18G2-02 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-F-19207/9 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 8566079-1 | Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA) |
| 860347-4 | Litton Systems Inc. Div Navigation Systems Division (USA) |
| MIL-PRF-19207/9 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 8114380-3 | L3harris Technologies, Inc. Dba Harris Corporation (USA) |
| 344024 | Littelfuse, Inc. (USA) |
| 927439-0538 | Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp (USA) |
| 12201 | Ap Labs, Inc. (USA) |
| J50-0004-002 | Aimtron Systems, Llc (USA) |
| 349023 | Littelfuse, Inc. (USA) |
| 5920PL1386624 | Jednolity Indeks Materialowy - Uniform Material Index (POL) |
NSN 5920-00-926-7517 is a Fuseholder,extractor Post, manufactured by Southwest Research Institute, classified under FSC 5920 (No Item Name Available). Status: cancelled.
NSN 5920-00-926-7517 has 15 cross-referenced part numbers: 2884-22-040-01 (Southwest Research Institute), 5M.4851.220.21 (Hensoldt Sensors Gmbh Div Seps), FHL18G2-2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), FHL18G2-02 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-F-19207/9 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M) and 10 more.
There are 12 known substitutes for 5920-00-926-7517: 5920-00-013-9863, 5920-00-043-1425, 5133-00-189-9246 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for 2884-22-040-01: Mounting Hole Quantity: 1; Bushing Thread Length: 0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN; Overall Diameter: 0.920 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN; Resistor Rating: 330.0 OHMS. 30 total characteristics are documented in the Federal Logistics Information System.
NSN 5920-00-926-7517 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.