MIL-PRF-19207/9 — Technical Data Sheet

✓ Verified by PartsTable

— · MRO · MRO_GENERAL

WHAT YOU NEED TO KNOW

Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel

Confirm exact part number — similar PNs may be different parts

PRODUCT OVERVIEW

The FUSEHOLDER,EXTRACTOR POST is a the manufacturer industrial component. Key specifications include body_style: BUSHING MOUNTED TYPE, lens_color: AMBER, cap_diameter: 0.530 INCHES NOMINAL IN, body_diameter: 0.820 INCHES NOMINAL IN, overall_width: 0.820 INCHES NOMINAL IN, overall_length: 3.310 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5920-00-013-9863, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ MIL-PRF-19207/9

NSN: 5920-00-013-9863
FSC: 5920
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

SPECIFICATIONS

material	PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS OR PLASTIC DIALLYL PHTHALATE AND GLASS BODY
body_style	BUSHING MOUNTED TYPE
lens_color	AMBER
cap_diameter	0.530 INCHES NOMINAL IN
body_diameter	0.820 INCHES NOMINAL IN
overall_width	0.820 INCHES NOMINAL IN
overall_length	3.310 INCHES MAXIMUM IN
resistor_rating	330.0 OHMS
bushing_diameter	0.625 INCHES NOMINAL IN
overall_diameter	0.810 INCHES NOMINAL IN
special_features	WEAPON SYSTEM ESSENTIAL
voltage_in_volts	33.0
NSN	5920-00-013-9863

COMPONENT DIAGRAM

KEY FEATURES

•

BODY STYLE: BUSHING MOUNTED TYPE

•

MATERIAL: PLASTIC DIALLYL PHTHALATE AND GLASS BODY

•

TEST DATA DOCUMENT: 81349-MIL-F-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

•

CRITICALITY CODE JUSTIFICATION: FEAT

•

SURFACE TREATMENT: NICKEL CONTACT

•

TERMINAL TYPE AND QUANTITY: 2 TAB, SOLDER LUG

•

FLATTED SIDE BUSHING HOLE LENGTH: 0.570 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

BODY STYLE	BUSHING MOUNTED TYPE
MATERIAL	PLASTIC DIALLYL PHTHALATE AND GLASS BODY
TEST DATA DOCUMENT	81349-MIL-F-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MATERIAL	COPPER CONTACT
CRITICALITY CODE JUSTIFICATION	FEAT
SURFACE TREATMENT	NICKEL CONTACT
TERMINAL TYPE AND QUANTITY	2 TAB, SOLDER LUG
FLATTED SIDE BUSHING HOLE LENGTH	0.570 INCHES MINIMUM AND 0.575 INCHES MAXIMUM IN
BUSHING HOLE DIAMETER	0.625 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
SURFACE TREATMENT	SOLDER AND TIN TERMINAL

VERIFIED SUBSTITUTES & CROSS-REFERENCES 26

FHL18G1-9InterchangeableGOVERNMENT REGISTRY