The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-285-8018, is classified within Federal Supply Class 5910 (Capacitors) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Tusonix, Llc. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-285-8018 |
| Primary Part Number | M39014-18-0347 |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — Capacitors |
| Manufacturer | Tusonix, Llc |
| Status | ACTIVE |
| Mounting Facility Type and Quantity | 1 THREADED BUSHING |
| Width Across Flats | 0.187 INCHES NOMINAL IN |
| Body Style | W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS |
| Tolerance Range Per Section | -20.00 TO 80.00 PERCENT SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC |
| Terminal Surface Treatment | SOLDER |
| Terminal Length | 0.415 INCHES NOMINAL IN |
| Mounting Facility Screw Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Reliability Failure Rate Level in Percent | 0.100 |
| Nonderated Continuous Voltage Rating and Type Per Section | 200.0 DC SINGLE SECTION |
| Schematic Diagram Designator | FEEDTHROUGH |
| Nominal Thread Size | 0.164 INCHES IN |
| Specification/standard Data | 81349-MIL-C-39014/18 GOVERNMENT SPECIFICATION |
| Body Length | 0.359 INCHES NOMINAL IN |
| Dissipation Factor at Reference Temp in Percent | 3.000 |
| Capacitance Value Per Section | 1000.000 PICOFARADS SINGLE SECTION |
| Reliability Indicator | ESTABLISHED |
| Voltage Temp Limits Per Section in Percent Capacitance Change | -66.0 TO 22.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION |
| Test Data Document | 81349-MIL-C-39014 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Terminal Type and Quantity | 2 SOLDER STUD |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| M39014-18-0347 PRIMARY | Tusonix, Llc (USA) |
| SB1B3-102MS | Avx Filters Corporation (USA) |
| 97007-007 PRIMARY | General Services Administration Federal Supply Service Gsa General Products Commodity Center (USA) |
| Reference | Meaning |
|---|---|
| 203-9001-710 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| 2136-3246-102-V F | 5/9 Secondary reference Pacific Aerospace & Electronics, Llc |
| M39014/18-0347 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
| MIL-C-39014/18 | C/1 Advisory reference — outside the item-of-supply concept U.S. Government activity |
NSN 5910-01-285-8018 is a Capacitor,fixed,ceramic Dielectr, manufactured by Tusonix, Llc, classified under FSC 5910, Capacitors. Status: active.
NSN 5910-01-285-8018 has 3 manufacturer part numbers on file: M39014-18-0347 (Tusonix, Llc), SB1B3-102MS (Avx Filters Corporation), 97007-007 (General Services Administration Federal Supply Service Gsa General Products Commodity Center).
1 possible match (shared part number, not a government interchangeability claim): 5910-01-335-1877. Verify interchangeability with system specifications before substitution.
Key specifications for M39014-18-0347: Mounting Facility Type and Quantity: 1 THREADED BUSHING; Width Across Flats: 0.187 INCHES NOMINAL IN; Body Style: W/THD MTG BUSHING, TERMINALS ON OPPOSITE ENDS; Tolerance Range Per Section: -20.00 TO 80.00 PERCENT SINGLE SECTION. 20 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.