The Capacitor,fixed,ceramic Dielectr, cataloged under National Stock Number 5910-01-225-3409, is classified within Federal Supply Class 5910 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 24 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5910-01-225-3409 |
| Primary Part Number | CCR14CG101GM |
| Item Name | Capacitor,fixed,ceramic Dielectr |
| FSC / FSG | 5910 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Center to Center Distance Between Terminals Parallel to Length | 0.100 INCHES NOMINAL IN |
| Body Length | 0.150 INCHES MAXIMUM IN |
| Schematic Diagram Designator | NO COMMON OR GROUNDED ELECTRODE(S) |
| Test Data Document | 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Terminal Diameter | 0.016 INCHES NOMINAL IN |
| Temp Coefficient of Capacitance Per Section in Ppm Per Deg Celsius | 0.0 SINGLE SECTION |
| Nonderated Operating Temp | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC |
| Insulation Resistance at Maximum Operating Temp | 10000.0 MEGOHMS |
| Tolerance Range Per Section | -2.00 TO 2.00 PERCENT SINGLE SECTION |
| Terminal Length | 1.250 INCHES MINIMUM IN |
| Body Width | 0.150 INCHES MAXIMUM IN |
| Nonderated Continuous Voltage Rating and Type Per Section | 100.0 DC SINGLE SECTION |
| Specification/standard Data | 81349-MIL-C-20/48 GOVERNMENT SPECIFICATION |
| Capacitance Value Per Section | 100.000 PICOFARADS SINGLE SECTION |
| Tolerance of Temp Coefficient Per Section in Ppm Per Deg Celsius | -30.0 TO 30.0 SINGLE SECTION |
| Terminal Type and Quantity | 2 UNINSULATED WIRE LEAD |
| Body Height | 0.080 INCHES MAXIMUM IN |
| Dissipation Factor at Reference Temp in Percent | 0.1500 |
| Insulation Resistance at Reference Temp | 100000.0 MEGOHMS |
| Material | PLASTIC CASE |
| Terminal Surface Treatment | SOLDER |
| Reliability Indicator | ESTABLISHED |
| Reliability Failure Rate Level in Percent | 1.0000 |
| Body Style | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| CCR14CG101GM | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| A3012808-134 | Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir (USA) |
| MIL-C-20/48 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5910-01-225-3409 is a Capacitor,fixed,ceramic Dielectr, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5910 (No Item Name Available). Status: active.
NSN 5910-01-225-3409 has 3 cross-referenced part numbers: CCR14CG101GM (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), A3012808-134 (Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir), MIL-C-20/48 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 12 known substitutes for 5910-01-225-3409: 5910-01-180-4389, 5910-01-214-0379, 5910-01-225-3408 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for CCR14CG101GM: Center to Center Distance Between Terminals Parallel to Length: 0.100 INCHES NOMINAL IN; Body Length: 0.150 INCHES MAXIMUM IN; Schematic Diagram Designator: NO COMMON OR GROUNDED ELECTRODE(S); Test Data Document: 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).. 24 total characteristics are documented in the Federal Logistics Information System.