PartsTable
Technical Data Sheet
PartsTable / MRO / A3012808-134
A3012808-134 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE, body_width: 0.150 INCHES MAXIMUM IN, body_height: 0.080 INCHES MAXIMUM IN, body_length: 0.150 INCHES MAXIMUM IN, terminal_length: 1.250 INCHES MINIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-01-225-3409, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ A3012808-134
NSN: 5910-01-225-3409
FSC: 5910
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
materialPLASTIC CASE
body_styleW/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
body_width0.150 INCHES MAXIMUM IN
body_height0.080 INCHES MAXIMUM IN
body_length0.150 INCHES MAXIMUM IN
terminal_length1.250 INCHES MINIMUM IN
terminal_diameter0.016 INCHES NOMINAL IN
reliability_indicatorESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatmentSOLDER
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-C-20/48 GOVERNMENT SPECIFICATION
NSN5910-01-225-3409
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,CERAMIC DIELECTR TITLE COMPONENT PN A3012808-134 MFR CAPACITOR,FIXED,CERAMI
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH: 0.100 INCHES NOMINAL IN
•
BODY LENGTH: 0.150 INCHES MAXIMUM IN
•
SCHEMATIC DIAGRAM DESIGNATOR: NO COMMON OR GROUNDED ELECTRODE(S)
•
TEST DATA DOCUMENT: 81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
TERMINAL DIAMETER: 0.016 INCHES NOMINAL IN
•
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS: 0.0 SINGLE SECTION
•
NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
•
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP: 10000.0 MEGOHMS
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH0.100 INCHES NOMINAL IN
BODY LENGTH0.150 INCHES MAXIMUM IN
SCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
TEST DATA DOCUMENT81349-MIL-C-20 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TERMINAL DIAMETER0.016 INCHES NOMINAL IN
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS0.0 SINGLE SECTION
NONDERATED OPERATING TEMP-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP10000.0 MEGOHMS
TOLERANCE RANGE PER SECTION-2.00 TO 2.00 PERCENT SINGLE SECTION
TERMINAL LENGTH1.250 INCHES MINIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
SR151A820JAAInterchangeable
interchangeable cross-reference
interchangeable
255459-1Interchangeable
interchangeable cross-reference
interchangeable
DB44BY820JInterchangeable
interchangeable cross-reference
interchangeable
MIL-C-20/48Interchangeable
interchangeable cross-reference
interchangeable
CN15C271GInterchangeable
interchangeable cross-reference
interchangeable
CCR14CG271GMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A3012808-134?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A3012808-134?
A3012808-134 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace A3012808-134?
There are 18 known substitutes for A3012808-134: SR151A820JAA, 255459-1, DB44BY820J and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A3012808-134?
A3012808-134 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5910-01-225-3409. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A3012808-134

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026