PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5906495

5906495 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include overall_length: 0.1740 INCHES NOMINAL IN, style_designator: NEEDLE ROLLER, BALL ENDS, rolling_element_diameter: 0.0624 INCHES MINIMUM AND 0.0626 INCHES MAXIMUM IN, standard_tolerance_designation: AFBMA STD TOLERANCE FOR LOOSE ROLLER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-01-339-1507, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5906495
NSN: 3110-01-339-1507
FSC: 3110
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
overall_length0.1740 INCHES NOMINAL IN
style_designatorNEEDLE ROLLER, BALL ENDS
rolling_element_diameter0.0624 INCHES MINIMUM AND 0.0626 INCHES MAXIMUM IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR LOOSE ROLLER
NSN3110-01-339-1507
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5906495 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ROLLING ELEMENT DIAMETER: 0.0624 INCHES MINIMUM AND 0.0626 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NEEDLE ROLLER, BALL ENDS
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR LOOSE ROLLER
TECHNICAL CHARACTERISTICS
ROLLING ELEMENT DIAMETER0.0624 INCHES MINIMUM AND 0.0626 INCHES MAXIMUM IN
STYLE DESIGNATORNEEDLE ROLLER, BALL ENDS
OVERALL LENGTH0.1740 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR LOOSE ROLLER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
6NBK919YZPANG25InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AS24464InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
6NBK919YZPInterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5906495?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5906495?
5906495 is a BEARING,ROLLER,NEEDLE.
What parts can replace 5906495?
There are 3 known substitutes for 5906495: 6NBK919YZPANG25, AS24464, 6NBK919YZP. Substitute compatibility should be verified for your specific system.
What is the NSN for 5906495?
5906495 is cataloged in the Federal Logistics Information System under NSN 3110-01-339-1507. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5906495

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026