PartsTable
Technical Data Sheet
PartsTable / COMPONENT / AS24464
AS24464 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL, bore_diameter: 2.9993 INCHES MINIMUM AND 3.0000 INCHES MAXIMUM IN, alignment_type: SELF-ALIGNING, surface_finish: GROUND, inner_ring_width: 1.2450 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN, outer_ring_width: 1.0440 INCHES MINIMUM AND 1.0490 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2866, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
AS24464
NSN: 3110-00-227-2866
FSC: 3110
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
bore_diameter2.9993 INCHES MINIMUM AND 3.0000 INCHES MAXIMUM IN
alignment_typeSELF-ALIGNING
surface_finishGROUND
inner_ring_width1.2450 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN
outer_ring_width1.0440 INCHES MINIMUM AND 1.0490 INCHES MAXIMUM IN
special_featuresOIL HOLE AND GROOVE IN OUTER AND INNER RINGS
style_designatorDOUBLE ROW
features_providedALIGNING RING
surface_treatmentCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
lubrication_materialGREASE
self-alignment_locationINTERNAL
NSN3110-00-227-2866
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: AS24464 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
ALIGNMENT TYPE: SELF-ALIGNING
•
FEATURES PROVIDED: ALIGNING RING
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
MATERIAL: STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
•
SURFACE TREATMENT: CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIALGREASE
ALIGNMENT TYPESELF-ALIGNING
SPECIAL FEATURESOIL HOLE AND GROOVE IN OUTER AND INNER RACE
FEATURES PROVIDEDALIGNING RING
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
MATERIALSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
SURFACE TREATMENTCADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
AS24464Interchangeable
interchangeable cross-reference
interchangeable
7NBK1021YZP2CInterchangeable
interchangeable cross-reference
interchangeable
7NBK1021YZPInterchangeable
interchangeable cross-reference
interchangeable
8NBK1224YZPInterchangeable
interchangeable cross-reference
interchangeable
8SAMILG3278Interchangeable
interchangeable cross-reference
interchangeable
NAS504-8MILG3278AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy AS24464?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is AS24464?
AS24464 is a BEARING,ROLLER,NEEDLE.
What parts can replace AS24464?
There are 30 known substitutes for AS24464: AS24464, 7NBK1021YZP2C, 7NBK1021YZP and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for AS24464?
AS24464 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2866. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — AS24464

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026