The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-01-084-0753, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 30 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-01-084-0753 |
| Primary Part Number | MIL-R-12934/6 |
| Item Name | Resistor,variable,wire Wound,pre |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Pilot Diameter | 0.7500 INCHES MAXIMUM IN |
| Cubic Measure | 1.439 CUBIC INCHES |
| Terminal Type and Quantity | 3 TURRET |
| Reliability Indicator | NOT ESTABLISHED |
| Shaft Length | 0.375 INCHES NOMINAL IN |
| Resistance Tolerance Per Section in Percent | -3.0 TO 3.0 SINGLE SECTION |
| Temp Coefficient of Resistance Per Section in Ppm Per Deg Celsius | -30.0 TO 30.0 SINGLE SECTION |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 125.0 SINGLE SECTION |
| Shaft End Play | 0.005 INCHES IN |
| Effective Electrical Rotation in Deg Angular Rotation | 3600.0 NOMINAL |
| Maximum Starting Torque | 0.70 INCH-OUNCES IN |
| Mounting Method | CLAMP RING(S) |
| Maximum Stop Torque | 48.00 INCH-OUNCES IN |
| Fragility Factor | RUGGED |
| Lateral Runout | 0.002 INCHES IN |
| Actuator Type | SINGLE SHAFT |
| Shaft Runout | 0.002 INCHES IN |
| Shaft Radial Play | 0.002 INCHES IN |
| Pilot Diameter Runout | 0.001 INCHES IN |
| Mechanical Backlash in Deg Angular Rotation | 1.5 |
| Maximum Running Torque | 0.60 INCH-OUNCES IN |
| Test Data Document | 81349-MIL-R-12934 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Body Diameter | 1.062 INCHES MAXIMUM IN |
| Actuator Travel Control Feature | STOPS |
| Undercut Diameter | 0.906 INCHES MAXIMUM IN |
| Function Characteristic Per Section | SINGLE SECTION LINEAR |
| Undercut Width | 0.0570 INCHES MINIMUM IN |
| Pilot Length | 0.0620 INCHES NOMINAL IN |
| Section Quantity | 1 |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-R-12934/6 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-PRF-12934/6 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| RR1000A2B9I102 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5905-01-084-0753 is a Resistor,variable,wire Wound,pre, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5905 (No Item Name Available). Status: active.
NSN 5905-01-084-0753 has 3 cross-referenced part numbers: MIL-R-12934/6 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-PRF-12934/6 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), RR1000A2B9I102 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There are 12 known substitutes for 5905-01-084-0753: 5905-00-003-5714, 5905-00-369-7719, 5905-00-566-3993 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-R-12934/6: Pilot Diameter: 0.7500 INCHES MAXIMUM IN; Cubic Measure: 1.439 CUBIC INCHES; Terminal Type and Quantity: 3 TURRET; Reliability Indicator: NOT ESTABLISHED. 30 total characteristics are documented in the Federal Logistics Information System.