PartsTable
Technical Data Sheet
PartsTable / MRO / RR1000A2B9I102
RR1000A2B9I102 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.625 INCHES MAXIMUM IN, shaft_style: ROUND, bearing_type: BALL SHAFT, pilot_length: 0.0620 INCHES NOMINAL IN, shaft_length: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-01-084-0753, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ RR1000A2B9I102
NSN: 5905-01-084-0753
FSC: 5905
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.625 INCHES MAXIMUM IN
shaft_styleROUND
bearing_typeBALL SHAFT
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.375 INCHES NOMINAL IN
shaft_runout0.002 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter1.062 INCHES MAXIMUM IN
cubic_measure1.439 CUBIC INCHES
lateral_runout0.002 INCHES IN
overall_length2.000 INCHES MAXIMUM IN
NSN5905-01-084-0753
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN RR1000A2B9I102 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
PILOT DIAMETER: 0.7500 INCHES MAXIMUM IN
•
CUBIC MEASURE: 1.439 CUBIC INCHES
•
TERMINAL TYPE AND QUANTITY: 3 TURRET
•
RELIABILITY INDICATOR: NOT ESTABLISHED
•
SHAFT LENGTH: 0.375 INCHES NOMINAL IN
•
RESISTANCE TOLERANCE PER SECTION IN PERCENT: -3.0 TO 3.0 SINGLE SECTION
•
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS: -30.0 TO 30.0 SINGLE SECTION
•
TERMINAL LOCATION: RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
TECHNICAL CHARACTERISTICS (FLIS)
PILOT DIAMETER0.7500 INCHES MAXIMUM IN
CUBIC MEASURE1.439 CUBIC INCHES
TERMINAL TYPE AND QUANTITY3 TURRET
RELIABILITY INDICATORNOT ESTABLISHED
SHAFT LENGTH0.375 INCHES NOMINAL IN
RESISTANCE TOLERANCE PER SECTION IN PERCENT-3.0 TO 3.0 SINGLE SECTION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-30.0 TO 30.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
SHAFT END PLAY0.005 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
MILR12934-6Interchangeable
interchangeable cross-reference
interchangeable
MIL-PRF-12934/6Interchangeable
interchangeable cross-reference
interchangeable
RR1000D2C8G502Interchangeable
interchangeable cross-reference
interchangeable
MILR12934-16Interchangeable
interchangeable cross-reference
interchangeable
RR3300B2H8A101Interchangeable
interchangeable cross-reference
interchangeable
RR1000F2A9H201Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy RR1000A2B9I102?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is RR1000A2B9I102?
RR1000A2B9I102 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace RR1000A2B9I102?
There are 14 known substitutes for RR1000A2B9I102: MILR12934-6, MIL-PRF-12934/6, RR1000D2C8G502 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for RR1000A2B9I102?
RR1000A2B9I102 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-01-084-0753. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — RR1000A2B9I102

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026