PartsTable TECHNICAL DATA SHEET
NSN 5905-00-945-6306Government record, cited

Resistor, Variable, Wire Wound, Pre5905-00-945-6306

NSN 5905-00-945-6306 · NIIN 009456306 · Part number 2325869
Lockheed Martin Corporation Div Rms - Mitchel Field · FSC 5905 — Resistor · FSG 59 — Electrical and Electronic Equipment Components · CAGE 56232
Government record, cited
NSN 5905-00-945-6306 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-945-6306. Manufacturer of record part number: 2325869.
Also searched as  5905-00-945-6306 · 5905009456306 · NIIN 009456306 · 00-945-6306 · FSC 5905 Resistor · CAGE 56232 · 2325869 · 200-8089 · 200-8089
Nearby stock numbers  ·
Features
  • Resistor,variable,wire Wound,pre — FSC 5905
  • Maximum Running Torque: 1.00 INCH-OUNCES IN
  • Body Diameter: 1.750 INCHES MAXIMUM IN
  • Electrical Resistance Per Section: 5.0 KILOHMS ALL SECTIONS
  • Mounting Lip Depth: 0.0930 INCHES NOMINAL IN
  • Undercut Width: 0.0730 INCHES MINIMUM IN
  • Section Quantity: 2
  • Shaft Diameter: 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
Identification
  • NSN: 5905-00-945-6306
  • NIIN: 009456306
  • FSC: 5905 — Resistor
  • FSG: 59 — Electrical and Electronic Equipment Components
  • Primary part number: 2325869
  • Manufacturer: Lockheed Martin Corporation Div Rms - Mitchel Field
General Description

The Resistor,variable,wire Wound,pre, cataloged under National Stock Number 5905-00-945-6306, is classified within Federal Supply Class 5905 (Resistor) of the Electrical and Electronic Equipment Components group. The manufacturer of record is Lockheed Martin Corporation Div Rms - Mitchel Field. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5905-00-945-6306
Primary Part Number2325869
Item NameResistor,variable,wire Wound,pre
FSC / FSG5905 / 59 — Resistor
ManufacturerLockheed Martin Corporation Div Rms - Mitchel Field
StatusACTIVE
Maximum Running Torque1.00 INCH-OUNCES IN
Body Diameter1.750 INCHES MAXIMUM IN
Electrical Resistance Per Section5.0 KILOHMS ALL SECTIONS
Mounting Lip Depth0.0930 INCHES NOMINAL IN
Undercut Width0.0730 INCHES MINIMUM IN
Section Quantity2
Shaft Diameter0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
Undercut Diameter0.562 INCHES MAXIMUM IN
Function Characteristic Per SectionALL SECTIONS LINEAR
Body StyleCYLINDRICAL SERVO MOUNTED
Function Conformity Tolerance Per Section-0.15 TO 0.15 ALL SECTIONS
Overall Diameter2.000 INCHES MAXIMUM IN
Mounting MethodCLAMP RING(S)
Maximum Starting Torque1.10 INCH-OUNCES IN
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE LOCATION NOT OTHERWISE SPECIFIED
Mounting Lip Diameter1.7500 INCHES NOMINAL IN
Shaft StyleROUND, SLOTTED
Actuator TypeSINGLE SHAFT
Shaft Length0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
Pilot Diameter1.5610 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM IN
Body Length1.442 INCHES MAXIMUM IN
Pilot Length0.0620 INCHES NOMINAL IN
Power Dissipation Rating Per Section in Watts3.0 FREE AIR ALL SECTIONS
Effective Electrical Rotation in Deg Angular Rotation354.0 NOMINAL
Reliability IndicatorNOT ESTABLISHED
Actuator Travel Control FeatureCONTINUOUS MOTION
Test Data Document10001-2325869 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
Resistance Tolerance Per Section in Percent-5.0 TO 5.0 ALL SECTIONS
Terminal Type and Quantity6 TURRET
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
200-8089 IV-Electronic Klaus Vespermann Kg (DEU)
200-8089 Vishay Sprague Inc (USA)
2325869 PRIMARY Lockheed Martin Corporation Div Rms - Mitchel Field (USA)
Reference documents
ReferenceMeaning
2325869 7/2 Vendor item drawing reference
Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

Frequently Asked Questions

What is NSN 5905-00-945-6306?

NSN 5905-00-945-6306 is a Resistor,variable,wire Wound,pre, manufactured by Lockheed Martin Corporation Div Rms - Mitchel Field, classified under FSC 5905, Resistor. Status: active.

What part numbers are listed for NSN 5905-00-945-6306?

NSN 5905-00-945-6306 has 3 manufacturer part numbers on file: 200-8089 (IV-Electronic Klaus Vespermann Kg), 200-8089 (Vishay Sprague Inc), 2325869 (Lockheed Martin Corporation Div Rms - Mitchel Field).

What are the specifications of 2325869?

Key specifications for 2325869: Maximum Running Torque: 1.00 INCH-OUNCES IN; Body Diameter: 1.750 INCHES MAXIMUM IN; Electrical Resistance Per Section: 5.0 KILOHMS ALL SECTIONS; Mounting Lip Depth: 0.0930 INCHES NOMINAL IN. 29 specifications are documented in the U.S. Government catalog.

Is NSN 5905-00-945-6306 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com