PartsTable
Technical Data Sheet
Download PDF

200-8089 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

200-8089: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: COPPER ALLOY OVERALL, body_style: CYLINDRICAL SERVO MOUNTED, body_length: 1.442 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, corner_shape: SQUARE ALL CORNERS, pilot_length: 0.0620 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-425-8616, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 200-8089
NSN: 3120-00-425-8616
NIINs: 004258616, 009456306
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 20149 — INTRUPA MFG CO (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
body_styleCYLINDRICAL SERVO MOUNTED
body_length1.442 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
corner_shapeSQUARE ALL CORNERS
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.688 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
actuator_typeSINGLE SHAFT
body_diameter1.750 INCHES MAXIMUM IN
overall_length2.317 INCHES MAXIMUM IN
pilot_diameter1.5610 INCHES MINIMUM AND 1.5620 INCHES MAXIMUM IN
shaft_diameter0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NSN3120-00-425-8616
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 200-8089 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY OUTSIDE DIAMETER: 1.2510 INCHES MINIMUM AND 1.2520 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
BODY INSIDE DIAMETER: 1.0010 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
BODY OUTSIDE DIAMETER1.2510 INCHES MINIMUM AND 1.2520 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
OVERALL LENGTH1.7425 INCHES MINIMUM AND 1.7575 INCHES MAXIMUM IN
BODY INSIDE DIAMETER1.0010 INCHES MINIMUM AND 1.0020 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 6
AA1213-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
SL1004-28Reference document
Same NSN cross-reference
Reference document — Secondary reference
18LA812-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LA812-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
I1213-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
A1213-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 200-8089?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 200-8089?
200-8089 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 200-8089?
There are 6 known substitutes for 200-8089: AA1213-2, SL1004-28, 18LA812-5 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 200-8089?
200-8089 is cataloged in the U.S. Government catalog under NSN 3120-00-425-8616. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 200-8089