The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-721-0289, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 3 commercial cross-references from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5905-00-721-0289 |
| Primary Part Number | MILR94 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | ACTIVE |
| Body Length | 0.375 INCHES NOMINAL IN |
| Shaft Length | 0.500 INCHES NOMINAL IN |
| Test Data Document | 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Specification/standard Data | 81349-MIL-R-94/2 GOVERNMENT SPECIFICATION |
| Mounting Method | LOCKING BUSHING |
| Maximum Starting Torque | 6.00 INCH-OUNCES IN |
| Rotary Actuator Travel in Angular Deg | 295.0 MINIMUM AND 305.0 MAXIMUM |
| Electrical Resistance Per Section | 5.0 KILOHMS SINGLE SECTION |
| Screw Thread Quantity Per Inch | 32.0 |
| Actuator Type | SINGLE SHAFT |
| Fragility Factor | MODERATELY RUGGED |
| Nonturn Device Radius | 0.375 INCHES NOMINAL IN |
| Features Provided | SHAFT LOCKING DEVICE |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 120.0 SINGLE SECTION |
| Device Design Type | NONTURN AT 9:00 OCLOCKUNABLE TO DECODE |
| Effective Electrical Rotation in Deg Angular Rotation | 295.0 MINIMUM AND 305.0 MAXIMUM |
| Screw Thread Diameter | 0.250 INCHES NOMINAL IN |
| Maximum Stop Torque | 128.00 INCH-OUNCES IN |
| Maximum Running Torque | 6.00 INCH-OUNCES IN |
| Screw Thread Series Designator | UNEF |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 70.0 SINGLE SECTION |
| Reliability Indicator | NOT ESTABLISHED |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| Shaft Style | ROUND, SLOTTED |
| Terminal Type and Quantity | 3 TAB, SOLDER LUG |
| Shaft Diameter | 0.125 INCHES NOMINAL IN |
| Mounting Bushing Length | 0.375 INCHES NOMINAL IN |
| Resistance Tolerance Per Section in Percent | -20.0 TO 20.0 SINGLE SECTION |
| Section Quantity | 1 |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MILR94 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| RV5LAXSB502B | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MIL-PRF-94/2 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
NSN 5905-00-721-0289 is a Resistor,variable,nonwire Wound,, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5905 (No Item Name Available). Status: active.
NSN 5905-00-721-0289 has 3 cross-referenced part numbers: MILR94 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), RV5LAXSB502B (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-PRF-94/2 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).
There is 1 known substitute for 5905-00-721-0289: 5905-00-583-5130. Verify interchangeability with system specifications before substitution.
Key specifications for MILR94: Body Length: 0.375 INCHES NOMINAL IN; Shaft Length: 0.500 INCHES NOMINAL IN; Test Data Document: 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Specification/standard Data: 81349-MIL-R-94/2 GOVERNMENT SPECIFICATION. 30 total characteristics are documented in the Federal Logistics Information System.