PartsTable
Technical Data Sheet
PartsTable / MRO / MILR94
MILR94 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 1.031 INCHES NOMINAL IN, flat_height: 0.216 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, switch_type: ROTARY, shaft_length: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-023-6175, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MILR94
NSN: 5905-00-023-6175
FSC: 5905
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length1.031 INCHES NOMINAL IN
flat_height0.216 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
switch_typeROTARY
shaft_length0.875 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.094 INCHES NOMINAL IN
cubic_measure2.987 CUBIC INCHES
overall_length2.062 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL IN
mounting_methodLOCKING BUSHING
NSN5905-00-023-6175
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN MILR94 MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
BODY DIAMETER: 1.093 INCHES NOMINAL IN
•
SHAFT LENGTH: 0.625 INCHES NOMINAL IN
•
TEST DATA DOCUMENT: 81349-MIL94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
POWER DISSIPATION RATING PER SECTION IN WATTS: 1.0 FREE AIR SINGLE SECTION
•
TERMINAL TYPE AND QUANTITY: 3 TAB, SOLDER LUG
•
RESISTANCE TOLERANCE PER SECTION IN PERCENT: -20.0 TO 20.0 SINGLE SECTION
•
ACTUATOR TYPE: SINGLE SHAFT
•
NONTURN DEVICE RADIUS: 0.531 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BODY DIAMETER1.093 INCHES NOMINAL IN
SHAFT LENGTH0.625 INCHES NOMINAL IN
TEST DATA DOCUMENT81349-MIL94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
RESISTANCE TOLERANCE PER SECTION IN PERCENT-20.0 TO 20.0 SINGLE SECTION
ACTUATOR TYPESINGLE SHAFT
NONTURN DEVICE RADIUS0.531 INCHES NOMINAL IN
MOUNTING METHODSTANDARD BUSHING
DEVICE DESIGN TYPEERR-030 AT 9:00 OCLOCKUNABLE TO DECODE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
3701-52C10-13Interchangeable
Same NIIN cross-reference
interchangeable
90-9B25-20-1R5MEGInterchangeable
Same NIIN cross-reference
interchangeable
RV4LAYSA504DInterchangeable
Same NIIN cross-reference
interchangeable
JLA5042SD4040Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILR94?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILR94?
MILR94 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace MILR94?
There are 4 known substitutes for MILR94: 3701-52C10-13, 90-9B25-20-1R5MEG, RV4LAYSA504D and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILR94?
MILR94 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-023-6175. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILR94

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026