PartsTable TECHNICAL DATA SHEET
JULY 2026Technical Data Sheet

JA1N048S253AAResistor,variable,nonwire Wound,

Rockwell Automation, Inc. Dba Rockwell Automation · NSN 5905-00-556-6784 · FSC 5905 · No Item Name Available
Verified by PartsTable
NSN 5905-00-556-6784 — this item is cataloged by the U.S. Government under National Stock Number 5905-00-556-6784. Primary manufacturer part number: JA1N048S253AA.
Features
  • Resistor,variable,nonwire Wound, — FSC 5905
  • Maximum Stop Torque: 128.00 INCH-OUNCES IN
  • Actuator Type: SINGLE SHAFT
  • Actuator Travel Control Feature: STOPS
  • Test Data Document: 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
  • Resistance Tolerance Per Section in Percent: -10.0 TO 10.0 SINGLE SECTION
  • Power Dissipation Rating Per Section in Watts: 1.0 FREE AIR SINGLE SECTION
  • Specification/standard Data: 81349-MIL-R-94/5 GOVERNMENT SPECIFICATION
Applications
  • Circuit regulation and filtering
  • Signal conditioning
  • Power supply stabilization
General Description

The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-556-6784, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Rockwell Automation, Inc. Dba Rockwell Automation. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 3 manufacturers, enabling identification through both NSN and commercial part number lookups. 7 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Cancelled.

Technical Specifications
ParameterValue
NSN5905-00-556-6784
Primary Part NumberJA1N048S253AA
Item NameResistor,variable,nonwire Wound,
FSC / FSG5905 / 59 — No Item Name Available
ManufacturerRockwell Automation, Inc. Dba Rockwell Automation
StatusCANCELLED
Maximum Stop Torque128.00 INCH-OUNCES IN
Actuator TypeSINGLE SHAFT
Actuator Travel Control FeatureSTOPS
Test Data Document81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Resistance Tolerance Per Section in Percent-10.0 TO 10.0 SINGLE SECTION
Power Dissipation Rating Per Section in Watts1.0 FREE AIR SINGLE SECTION
Specification/standard Data81349-MIL-R-94/5 GOVERNMENT SPECIFICATION
Terminal LocationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
Ambient Temp in Deg Celsius Per Section at Full Rated Power70.0 SINGLE SECTION
Terminal Type and Quantity3 TAB, SOLDER LUG
Shaft Length0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN
Reliability IndicatorNOT ESTABLISHED
Body StyleCYLINDRICAL BUSHING MOUNTED
Screw Thread Quantity Per Inch32.0
Screw Thread Series DesignatorUNEF
Rotary Actuator Travel in Angular Deg309.0 MINIMUM AND 320.0 MAXIMUM
Screw Thread Diameter0.375 INCHES NOMINAL IN
Nonturn Device Radius0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN
Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power120.0 SINGLE SECTION
Mounting MethodSTANDARD BUSHING
Electrical Resistance Per Section25.0 KILOHMS SINGLE SECTION
Device Design TypeERR-030 AT 9:00 OCLOCKUNABLE TO DECODE
Mounting Bushing Length0.344 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
Maximum Starting Torque6.00 INCH-OUNCES IN
Overall Diameter1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
Section Quantity1
Shaft StyleROUND, SLOTTED
Shaft Diameter0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
Body Length0.468 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusCANCELLED
HAZMATNo
Verified Substitutes 7
5330-00-012-9577 INTERCHANGEABLE
Packing,preformed
5330-00-285-6389106275 INTERCHANGEABLE
Seal,plain Encased
Cummins Inc.
5910-00-817-727511065107-003 INTERCHANGEABLE
Capacitor,fixed,plastic Dielectr
Us Army Aviation and Missile Command
3010-01-135-274716137 INTERCHANGEABLE
Tab,retainer
Westerbeke Corporation
1730-01-205-393116137 INTERCHANGEABLE
Eye,lunnette
Moran Equipment Corp
6515-01-583-2426OP5680 INTERCHANGEABLE
Scissors,tenotomy
Cardinal Health 200, Llc
5340-01-612-1418909330 INTERCHANGEABLE
Eye Hook
The Wallace Forge Co
Cross-Reference Index
Part NumberManufacturer
JA1N048S253AA Rockwell Automation, Inc. Dba Rockwell Automation (USA)
16137 Thales Defense & Security Inc Dba Thales Communications Inc (USA)
MILR94-5 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
RV4NAYSD253C Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
MIL-PRF-94/5 Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
Related Parts
5330-00-012-9577INTERCHANGEABLE
PACKING,PREFORMED
5330-00-285-6389INTERCHANGEABLE
SEAL,PLAIN ENCASED
106275
5910-00-817-7275INTERCHANGEABLE
CAPACITOR,FIXED,PLASTIC DIELECTR
11065107-003
3010-01-135-2747INTERCHANGEABLE
TAB,RETAINER
16137
1730-01-205-3931INTERCHANGEABLE
EYE,LUNNETTE
16137
6515-01-583-2426INTERCHANGEABLE
SCISSORS,TENOTOMY
OP5680
5340-01-612-1418INTERCHANGEABLE
EYE HOOK
909330

Frequently Asked Questions

What is NSN 5905-00-556-6784?

NSN 5905-00-556-6784 is a Resistor,variable,nonwire Wound,, manufactured by Rockwell Automation, Inc. Dba Rockwell Automation, classified under FSC 5905 (No Item Name Available). Status: cancelled.

What are the part numbers for NSN 5905-00-556-6784?

NSN 5905-00-556-6784 has 5 cross-referenced part numbers: JA1N048S253AA (Rockwell Automation, Inc. Dba Rockwell Automation), 16137 (Thales Defense & Security Inc Dba Thales Communications Inc), MILR94-5 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), RV4NAYSD253C (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MIL-PRF-94/5 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M).

What NSN replaces 5905-00-556-6784?

There are 7 known substitutes for 5905-00-556-6784: 5330-00-012-9577, 5330-00-285-6389, 5910-00-817-7275 and 4 more. Verify interchangeability with system specifications before substitution.

What are the specifications of JA1N048S253AA?

Key specifications for JA1N048S253AA: Maximum Stop Torque: 128.00 INCH-OUNCES IN; Actuator Type: SINGLE SHAFT; Actuator Travel Control Feature: STOPS; Test Data Document: 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).. 30 total characteristics are documented in the Federal Logistics Information System.

Is NSN 5905-00-556-6784 still in active supply?

NSN 5905-00-556-6784 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.

Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com