PartsTable
Technical Data Sheet
PartsTable / MRO / MILR94-5
MILR94-5 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.562 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 2.000 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 1.094 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-001-2890, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ MILR94-5
NSN: 5905-00-001-2890
FSC: 5905
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.562 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length2.000 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.094 INCHES NOMINAL IN
overall_length2.062 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL IN
mounting_methodSTANDARD BUSHING
overall_diameter1.515 INCHES MAXIMUM IN
section_quantity1
terminal_locationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
NSN5905-00-001-2890
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN MILR94-5 MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
ACTUATOR TYPE: SINGLE SHAFT
•
MOUNTING BUSHING LENGTH: 0.375 INCHES NOMINAL IN
•
POWER DISSIPATION RATING PER SECTION IN WATTS: 1.0 FREE AIR SINGLE SECTION
•
TEST DATA DOCUMENT: 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
•
RESISTANCE TOLERANCE PER SECTION IN PERCENT: -10.0 TO 10.0 SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER: 70.0 SINGLE SECTION
•
TERMINAL LOCATION: RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TECHNICAL CHARACTERISTICS (FLIS)
ACTUATOR TYPESINGLE SHAFT
OVERALL LENGTH2.562 INCHES NOMINAL IN
MOUNTING BUSHING LENGTH0.375 INCHES NOMINAL IN
POWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
TEST DATA DOCUMENT81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
ACTUATOR TRAVEL CONTROL FEATURESTOPS
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
507447Interchangeable
Same NIIN cross-reference
interchangeable
JA1N200P104BAInterchangeable
Same NIIN cross-reference
interchangeable
RV4NAYSJ104EInterchangeable
Same NIIN cross-reference
interchangeable
MIL-PRF-94/5Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MILR94-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MILR94-5?
MILR94-5 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace MILR94-5?
There are 4 known substitutes for MILR94-5: 507447, JA1N200P104BA, RV4NAYSJ104E and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MILR94-5?
MILR94-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-001-2890. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MILR94-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026