The Resistor,variable,nonwire Wound,, cataloged under National Stock Number 5905-00-088-2358, is classified within Federal Supply Class 5905 (No Item Name Available) of the Electrical and Electronic Equipment Components group. The primary manufacturer of record is Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M. Government technical data includes 29 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 4 commercial cross-references from 2 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Cancelled.
| Parameter | Value |
|---|---|
| NSN | 5905-00-088-2358 |
| Primary Part Number | MIL-PRF-94/4 |
| Item Name | Resistor,variable,nonwire Wound, |
| FSC / FSG | 5905 / 59 — No Item Name Available |
| Manufacturer | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| Status | CANCELLED |
| Maximum Starting Torque | 6.00 INCH-OUNCES IN |
| Shaft Length | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN |
| Test Data Document | 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Terminal Type and Quantity | 3 TAB, SOLDER LUG |
| Terminal Location | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| Resistance Tolerance Per Section in Percent | -10.0 TO 10.0 SINGLE SECTION |
| Power Dissipation Rating Per Section in Watts | 0.5 FREE AIR SINGLE SECTION |
| Ambient Temp in Deg Celsius Per Section at Full Rated Power | 70.0 SINGLE SECTION |
| Specification/standard Data | 81349-MIL-R-94/4 GOVERNMENT SPECIFICATION |
| Actuator Travel Control Feature | STOPS |
| Reliability Indicator | NOT ESTABLISHED |
| Screw Thread Diameter | 0.375 INCHES NOMINAL IN |
| Ambient Temp in Deg Celsius Per Section at Zero Percent Rated Power | 120.0 SINGLE SECTION |
| Mounting Method | STANDARD BUSHING |
| Electrical Resistance Per Section | 10.0 KILOHMS SINGLE SECTION |
| Rotary Actuator Travel in Angular Deg | 251.0 MINIMUM AND 318.0 MAXIMUM |
| Screw Thread Quantity Per Inch | 32.0 |
| Screw Thread Series Designator | UNEF |
| Device Design Type | ERR-030 AT 9:00 OCLOCKUNABLE TO DECODE |
| Nonturn Device Radius | 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM IN |
| Maximum Stop Torque | 128.00 INCH-OUNCES IN |
| Mounting Bushing Length | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN |
| Overall Diameter | 1.274 INCHES MAXIMUM IN |
| Body Diameter | 0.890 INCHES MINIMUM AND 0.922 INCHES MAXIMUM IN |
| Shaft Diameter | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN |
| Actuator Type | SINGLE SHAFT |
| Section Quantity | 1 |
| Body Length | 0.437 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN |
| Shaft Style | ROUND, SLOTTED |
| Acquisition Status | CANCELLED |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| MIL-PRF-94/4 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| MILR94 | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| RV2NAYSD103C | Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M |
| 2100-1815 | Hewlett-Packard Company Dba HP (USA) |
NSN 5905-00-088-2358 is a Resistor,variable,nonwire Wound,, manufactured by Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M, classified under FSC 5905 (No Item Name Available). Status: cancelled.
NSN 5905-00-088-2358 has 4 cross-referenced part numbers: MIL-PRF-94/4 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), MILR94 (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), RV2NAYSD103C (Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M), 2100-1815 (Hewlett-Packard Company Dba HP).
There is 1 known substitute for 5905-00-088-2358: 5905-00-405-1259. Verify interchangeability with system specifications before substitution.
Key specifications for MIL-PRF-94/4: Maximum Starting Torque: 6.00 INCH-OUNCES IN; Shaft Length: 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM IN; Test Data Document: 81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).; Terminal Type and Quantity: 3 TAB, SOLDER LUG. 30 total characteristics are documented in the Federal Logistics Information System.
NSN 5905-00-088-2358 is currently cancelled. Check with the Defense Logistics Agency for current availability and authorized substitutes.