Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, length: 0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN, material: STEEL OVERALL, hole_diameter: 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN, overall_height: 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-014-9320, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
5808055
NSN:5340-01-014-9320 FSC:5340 CAGE:53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
length
0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
material
STEEL OVERALL
hole_diameter
0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
hole_quantity
2
overall_height
0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
style_designator
STANDOFF
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
loop/holding_dimension
0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
distance_from_loop_center_to_end
0.190 INCHES NOMINAL IN
NSN
5340-01-014-9320
COMPONENT DIAGRAM
KEY FEATURES
•
WIDTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
•
LOOP/HOLDING DIMENSION: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
LENGTH: 0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.090 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
MATERIAL
STEEL OVERALL
MATERIAL THICKNESS
0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION
0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
LENGTH
0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
ASTM A682 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5808055?
5808055 is a CLIP,SPRING TENSION.
What parts can replace 5808055?
There are 26 known substitutes for 5808055: M24066/2-030, MIL-C-24066/2-230, M24066/2-230 and 23 more. Substitute compatibility should be verified for your specific system.
Is 5808055 still available?
5808055 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.