PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5800332-1305-001
5800332-1305-001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 0.820 INCHES NOMINAL IN, material: STEEL COMP 302 OVERALL, hole_diameter: 0.120 INCHES NOMINAL IN, overall_height: 0.689 INCHES NOMINAL IN, surface_treatment: PASSIVATE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-855-1924, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5800332-1305-001
NSN: 5340-00-855-1924
FSC: 5340
CAGE: C0426 — HENSOLDT SENSORS GMBH (DEU)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
length0.820 INCHES NOMINAL IN
materialSTEEL COMP 302 OVERALL
hole_diameter0.120 INCHES NOMINAL IN
overall_height0.689 INCHES NOMINAL IN
surface_treatmentPASSIVATE OVERALL
material_thickness0.019 INCHES NOMINAL IN
loop/holding_dimension0.420 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-855-1924
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5800332-1305-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.820 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 302 OVERALL
•
WIDTH: 1.000 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.019 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.120 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.420 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH0.820 INCHES NOMINAL IN
OVERALL HEIGHT0.689 INCHES NOMINAL IN
MATERIALSTEEL COMP 302 OVERALL
WIDTH1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.019 INCHES NOMINAL IN
HOLE DIAMETER0.120 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.420 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
28473-00499Interchangeable
interchangeable cross-reference
interchangeable
530052Interchangeable
interchangeable cross-reference
interchangeable
10374561Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5800332-1305-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5800332-1305-001?
5800332-1305-001 is a CLIP,SPRING TENSION.
What parts can replace 5800332-1305-001?
There are 3 known substitutes for 5800332-1305-001: 28473-00499, 530052, 10374561. Substitute compatibility should be verified for your specific system.
What is the NSN for 5800332-1305-001?
5800332-1305-001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-855-1924. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5800332-1305-001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026