PartsTable
Technical Data Sheet
530052 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,DIODE is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 0.820 INCHES NOMINAL IN, material: SILICON SEMICONDUCTOR, hole_diameter: 0.120 INCHES NOMINAL IN, overall_height: 0.689 INCHES NOMINAL IN, overall_length: 0.180 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-855-1924, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
530052
NSN: 5340-00-855-1924
FSC: 5340
CAGE: 80249 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
length0.820 INCHES NOMINAL IN
materialSILICON SEMICONDUCTOR
hole_diameter0.120 INCHES NOMINAL IN
overall_height0.689 INCHES NOMINAL IN
overall_length0.180 INCHES MAXIMUM IN
overall_diameter0.075 INCHES MAXIMUM IN
features_providedHERMETICALLY SEALED CASE
surface_treatmentPASSIVATE OVERALL
material_thickness0.019 INCHES NOMINAL IN
loop/holding_dimension0.420 INCHES NOMINAL IN
end_item_identificationDLA/GSA MANAGED ITEMS THAT CANNOT BE IDENTIFIED TO A SPECIFIC ARMY WEAPONS SYSTEMS/END ITEM
NSN5340-00-855-1924
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 530052 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
LENGTH: 0.820 INCHES NOMINAL IN
MATERIAL: STEEL COMP 302 OVERALL
WIDTH: 1.000 INCHES NOMINAL IN
MATERIAL THICKNESS: 0.019 INCHES NOMINAL IN
HOLE DIAMETER: 0.120 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION: 0.420 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH0.820 INCHES NOMINAL IN
OVERALL HEIGHT0.689 INCHES NOMINAL IN
MATERIALSTEEL COMP 302 OVERALL
WIDTH1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.019 INCHES NOMINAL IN
HOLE DIAMETER0.120 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.420 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
28473-00499Interchangeable
interchangeable cross-reference
interchangeable
530052Interchangeable
interchangeable cross-reference
interchangeable
10374561Interchangeable
interchangeable cross-reference
interchangeable
5800332-1305-001Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 530052?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 530052?
530052 is a SEMICONDUCTOR DEVICE,DIODE.
What parts can replace 530052?
There are 4 known substitutes for 530052: 28473-00499, 530052, 10374561 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 530052?
530052 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-855-1924. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 530052