PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 57-0711
57-0711 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The SEMICONDUCTOR DEVICE,THYRISTOR is a the manufacturer industrial component. Key specifications include unit_type: COAXIAL LINE, bore_shape: STRAIGHT, design_type: UNIDIRECTIONAL, bore_diameter: 95.00 MILLIMETERS NOMINAL MM, overall_width: 0.820 INCHES MAXIMUM IN, load_direction: RADIAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6474, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
57-0711
NSN: 3110-00-155-6474
FSC: 3110
CAGE: 07638 — BLAW KNOX CORP EXECUTIVE OFFICES (USA)
SPECIFICATIONS
unit_typeCOAXIAL LINE
bore_shapeSTRAIGHT
design_typeUNIDIRECTIONAL
bore_diameter95.00 MILLIMETERS NOMINAL MM
overall_width0.820 INCHES MAXIMUM IN
load_directionRADIAL
overall_height0.675 INCHES MAXIMUM IN
overall_length1.010 INCHES MAXIMUM IN
surface_finishGROUND
lubrication_materialLUBRICANT
power_loss_in_decibels0.3
radio_frequency_rating29.2 MEGAHERTZ MINIMUM AND 30.8 MEGAHERTZ MAXIMUM
NSN3110-00-155-6474
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 57-0711 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LUBRICATION MATERIAL: LUBRICANT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
OVERALL OUTSIDE DIAMETER: 170.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH32.0000 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIALLUBRICANT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
OVERALL OUTSIDE DIAMETER170.00 MILLIMETERS NOMINAL MM
BORE DIAMETER95.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
2BE910Interchangeable
interchangeable cross-reference
interchangeable
8QWInterchangeable
interchangeable cross-reference
interchangeable
100R5-8Interchangeable
interchangeable cross-reference
interchangeable
12-19Interchangeable
interchangeable cross-reference
interchangeable
0141703A04Interchangeable
interchangeable cross-reference
interchangeable
12-25Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 57-0711?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 57-0711?
57-0711 is a SEMICONDUCTOR DEVICE,THYRISTOR.
What parts can replace 57-0711?
There are 28 known substitutes for 57-0711: 2BE910, 8QW, 100R5-8 and 25 more. Substitute compatibility should be verified for your specific system.
Is 57-0711 still available?
57-0711 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 57-0711

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026