PartsTable / COMPONENT / 5533-4
5533-4
✓ Verified by PartsTable
Dujardin · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
Overview<br>PLA is an easy-to-print filament made of renewable plant-based resources. Verbatim PLA is made to a special recipe with high quality controls as standard. It is odourless with good post-printing workability, making it a wonderful all-purpose material for a wide range of applications including concept modelling and education.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-752-7720, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
5533-4
NSN: 5330-00-752-7720 FSC: 5330 CAGE: 78640 — MITSUBISHI CATERPILLAR FORKLIFT AMERICA, INC (USA)
SPECIFICATIONS
length 1.654 INCHES MINIMUM AND 1.656 INCHES MAXIMUM IN diameter 0.312 INCHES NOMINAL IN material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL body_width 1.000 INCHES NOMINAL IN body_height 1.000 INCHES NOMINAL IN body_length 2.000 INCHES NOMINAL IN inclosure_type FULLY INCLOSED hardness_rating 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL mounting_method THREADED STUD(S) SINGLE GROUP frequency_rating 60.0 HERTZ NOMINAL SINGLE COMPONENT outside_diameter 0.940 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN style_designator LEFT INTERNAL AND RIGHT INTERNAL THREADS NSN 5330-00-752-7720
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 5533-4
MFR: Dujardin
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 0.940 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN
• CROSS-SECTIONAL THICKNESS: 0.098 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
• APERTURE DIAMETER: 0.816 INCHES MINIMUM AND 0.826 INCHES MAXIMUM IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
• MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 5BG715 ASSN STD ALL MATERIAL RESPONSES OVERALL
• HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 0.940 INCHES MINIMUM AND 0.952 INCHES MAXIMUM IN CROSS-SECTIONAL THICKNESS 0.098 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN APERTURE DIAMETER 0.816 INCHES MINIMUM AND 0.826 INCHES MAXIMUM IN CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL MATERIAL DOCUMENT AND CLASSIFICATION ASTM D2000 5BG715 ASSN STD ALL MATERIAL RESPONSES OVERALL HARDNESS RATING 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
5533-4 Interchangeable interchangeable cross-reference
interchangeable
7047720 Interchangeable interchangeable cross-reference
interchangeable
52610 Interchangeable interchangeable cross-reference
interchangeable
B677 Interchangeable interchangeable cross-reference
interchangeable
934B0553344 Interchangeable interchangeable cross-reference
interchangeable
934B055344 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 5533-4?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5533-4?
5533-4 is a CUTTER,MILLING,METAL SLITTING manufactured by Dujardin.
What parts can replace 5533-4?
There are 6 known substitutes for 5533-4: 5533-4, 7047720, 52610 and 3 more. Substitute compatibility should be verified for your specific system.
Is 5533-4 still available?
5533-4 is currently cancelled.