PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 934B055344
934B055344 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 1.654 INCHES MINIMUM AND 1.656 INCHES MAXIMUM IN, diameter: 0.312 INCHES NOMINAL IN, style_designator: LEFT INTERNAL AND RIGHT INTERNAL THREADS, width_between_flats: 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, cross-sectional_shape: ROUND, flatted_portion_length: 0.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-143-6070, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
934B055344
NSN: 5340-01-143-6070
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
length1.654 INCHES MINIMUM AND 1.656 INCHES MAXIMUM IN
diameter0.312 INCHES NOMINAL IN
style_designatorLEFT INTERNAL AND RIGHT INTERNAL THREADS
width_between_flats0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
cross-sectional_shapeROUND
flatted_portion_length0.375 INCHES NOMINAL IN
distance_from_end_to_flatted_section0.625 INCHES NOMINAL IN
NSN5340-01-143-6070
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 934B055344 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: LEFT INTERNAL AND RIGHT INTERNAL THREADS
•
FLATTED PORTION LENGTH: 0.375 INCHES NOMINAL IN
•
DISTANCE FROM END TO FLATTED SECTION: 0.625 INCHES NOMINAL IN
•
DIAMETER: 0.312 INCHES NOMINAL IN
•
WIDTH BETWEEN FLATS: 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
LENGTH: 1.654 INCHES MINIMUM AND 1.656 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORLEFT INTERNAL AND RIGHT INTERNAL THREADS
FLATTED PORTION LENGTH0.375 INCHES NOMINAL IN
DISTANCE FROM END TO FLATTED SECTION0.625 INCHES NOMINAL IN
DIAMETER0.312 INCHES NOMINAL IN
WIDTH BETWEEN FLATS0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
LENGTH1.654 INCHES MINIMUM AND 1.656 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
ER8386Interchangeable
interchangeable cross-reference
interchangeable
55334Interchangeable
interchangeable cross-reference
interchangeable
7047720Interchangeable
interchangeable cross-reference
interchangeable
52610Interchangeable
interchangeable cross-reference
interchangeable
B677Interchangeable
interchangeable cross-reference
interchangeable
934B0553344Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 934B055344?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 934B055344?
934B055344 is a STANDOFF,THREADED,SPACING.
What parts can replace 934B055344?
There are 6 known substitutes for 934B055344: ER8386, 55334, 7047720 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 934B055344?
934B055344 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-143-6070. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 934B055344

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026