PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 540201-008
540201-008 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.173 INCHES NOMINAL IN, material: PLASTIC POLYAMIDE NYLON BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.050 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-337-8642, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
540201-008
NSN: 5340-00-337-8642
FSC: 5340
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
diameter0.173 INCHES NOMINAL IN
materialPLASTIC POLYAMIDE NYLON BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter0.563 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.781 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.593 INCHES NOMINAL IN
NSN5340-00-337-8642
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 540201-008 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL: PLASTIC POLYAMIDE NYLON BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.781 INCHES NOMINAL IN
•
DIAMETER: 0.173 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.593 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALPLASTIC POLYAMIDE NYLON BAND
STYLE DESIGNATORSINGLE LOOP
DISTANCE FROM LOOP CENTER TO TONGUE END0.781 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
DIAMETER0.173 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.593 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.563 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
HP8NUpgraded Successor
successor cross-reference
successor
99024233Upgraded Successor
successor cross-reference
successor
672B452P7Upgraded Successor
successor cross-reference
successor
710876-9Upgraded Successor
successor cross-reference
successor
HP-9NUpgraded Successor
successor cross-reference
successor
CP30-1-11-8AUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 540201-008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 540201-008?
540201-008 is a CLAMP,LOOP.
What parts can replace 540201-008?
There are 23 known substitutes for 540201-008: HP8N, 99024233, 672B452P7 and 20 more. Substitute compatibility should be verified for your specific system.
Is 540201-008 still available?
540201-008 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 540201-008

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026