54-SL-234 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

54-SL-234: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.748 INCHES MINIMUM AND 1.792 INCHES MAXIMUM IN, center_hole_diameter: 1.339 INCHES MINIMUM AND 1.361 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-005-3704, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

54-SL-234

NSN: 5331-01-005-3704
FSC: 5331 — O-ring
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)

SPECIFICATIONS

material	RUBBER FLUOROCARBON CLASS FPM
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	1.748 INCHES MINIMUM AND 1.792 INCHES MAXIMUM IN
center_hole_diameter	1.339 INCHES MINIMUM AND 1.361 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN	5331-01-005-3704

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.748 INCHES MINIMUM AND 1.792 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 1.339 INCHES MINIMUM AND 1.361 INCHES MAXIMUM IN

•

MATERIAL: RUBBER FLUOROCARBON CLASS FPM

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.748 INCHES MINIMUM AND 1.792 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	1.339 INCHES MINIMUM AND 1.361 INCHES MAXIMUM IN
MATERIAL	RUBBER FLUOROCARBON CLASS FPM

SUBSTITUTES & CROSS-REFERENCES 7

SAE-AMS7276Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AS3209-324Reference document

Same NSN cross-reference

Reference document — Secondary reference

D-67500-89Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

M83248/1-324Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-R-83248/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

H645-5511-F223Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 54-SL-234?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 54-SL-234?

54-SL-234 is a O-RING.

What parts can replace 54-SL-234?

There are 7 known substitutes for 54-SL-234: SAE-AMS7276, AS3209-324, D-67500-89 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 54-SL-234?

54-SL-234 is cataloged in the U.S. Government catalog under NSN 5331-01-005-3704. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

54-SL-234 — O-RING

Request a Quote — 54-SL-234