PartsTable
Technical Data Sheet
Download PDF

54-67-2912 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

54-67-2912: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN, center_hole_diameter: 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-167-5175, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
54-67-2912
NSN: 5331-00-167-5175
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN
center_hole_diameter0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
end_item_identificationMRAP - RG-33 AUV; MRAP - M-ATV
NSN5331-00-167-5175
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 54-67-2912 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONMRAP - RG-33 AUV; MRAP - M-ATV
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 8
D2500FF-B16.24 ITEM 19Reference document
Same NSN cross-reference
Reference document — Secondary reference
5331PL2221414Reference document
Same NSN cross-reference
Reference document — Informative reference only
PRP912-19359Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AS3581-912Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS568-912 MIL-R-83248 CLASS 2Reference document
Same NSN cross-reference
Reference document — Secondary reference
6640219 FIND 35Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 54-67-2912?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 54-67-2912?
54-67-2912 is a O-RING.
What parts can replace 54-67-2912?
There are 8 known substitutes for 54-67-2912: D2500FF-B16.24 ITEM 19, 5331PL2221414, PRP912-19359 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 54-67-2912?
54-67-2912 is cataloged in the U.S. Government catalog under NSN 5331-00-167-5175. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 54-67-2912