PartsTable
Technical Data Sheet
PartsTable / O-RING / D2500FF-B16.24 ITEM 19
D2500FF-B16.24 ITEM 19 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The D2500FF-B16.24 ITEM 19 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-167-5175, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D2500FF-B16.24 ITEM 19
NSN: 5331-00-167-5175
FSC: 5331 — O-RING
CAGE: 65079 — DANCO VALVE COMPANY (USA)
SPECIFICATIONS
Part NumberD2500FF-B16.24 ITEM 19
NSN5331-00-167-5175
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D2500FF-B16.24 ITEM 19 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER FLUOROCARBON CLASS FPM
ELONGATION PERCENTAGE125 MAXIMUM
END ITEM IDENTIFICATIONMRAP - RG-33 AUV; MRAP - M-ATV
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.915 INCHES MINIMUM AND 0.933 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
CA030166Interchangeable
interchangeable cross-reference
interchangeable
3912Interchangeable
interchangeable cross-reference
interchangeable
CV2031340-8301VEQPC49Interchangeable
interchangeable cross-reference
interchangeable
201-365PC70Interchangeable
interchangeable cross-reference
interchangeable
201-370PC49Interchangeable
interchangeable cross-reference
interchangeable
GGG-C-95Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D2500FF-B16.24 ITEM 19?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D2500FF-B16.24 ITEM 19?
D2500FF-B16.24 ITEM 19 is a D2500FF-B16.24 ITEM 19.
What parts can replace D2500FF-B16.24 ITEM 19?
There are 29 known substitutes for D2500FF-B16.24 ITEM 19: CA030166, 3912, CV2031340-8301VEQPC49 and 26 more. Substitute compatibility should be verified for your specific system.
Is D2500FF-B16.24 ITEM 19 still available?
D2500FF-B16.24 ITEM 19 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D2500FF-B16.24 ITEM 19

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026