5360PL0545131 — SPRING,HELICAL,EXTENSION

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

5360PL0545131: SPRING,HELICAL,EXTENSION.

The SPRING,HELICAL,EXTENSION is a the manufacturer industrial component. Key specifications include end_style: MACHINE CUT-OFF FIRST END, design_type: CLOSED, hook_radius: 0.120 INCHES NOMINAL SECOND END IN, load_rating: 10.00 POUNDS MINIMUM AND 14.00 POUNDS MAXIMUM LBS, coil_quantity: 11, opening_width: 0.220 INCHES MINIMUM SECOND END IN. This part is cataloged in the U.S.

Government catalog under NSN 5360-00-876-8557, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5360PL0545131

NSN: 5360-00-876-8557
FSC: 5360 — Coil, Flat, Leaf, and Wire Springs
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)

SPECIFICATIONS

end_style	MACHINE CUT-OFF FIRST END
design_type	CLOSED
hook_radius	0.120 INCHES NOMINAL SECOND END IN
load_rating	10.00 POUNDS MINIMUM AND 14.00 POUNDS MAXIMUM LBS
coil_quantity	11
opening_width	0.220 INCHES MINIMUM SECOND END IN
inside_diameter	0.257 INCHES NOMINAL IN
style_designator	CYLINDRICAL
surface_treatment	VARNISH OVERALL
coil_helix_direction	RIGHT-HAND OR LEFT-HAND
spring_deflection_rate	65.300 POUNDS PER INCH NOMINAL LBS
spring_length_under_load	1.250 INCHES NOMINAL IN
NSN	5360-00-876-8557

COMPONENT DIAGRAM

KEY FEATURES

•

SPRING FREE OUTSIDE DIAMETER: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN

•

LOAD RATING: 10.00 POUNDS MINIMUM AND 14.00 POUNDS MAXIMUM LBS

•

END STYLE: MACHINE LOOP SECOND END

•

DESIGN TYPE: CLOSED

•

STYLE DESIGNATOR: CYLINDRICAL

•

OPENING WIDTH: 0.220 INCHES MINIMUM SECOND END IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A227-41 ASSN STD 1ST MATERIAL RESPONSE OR ASTM 229-41 ASSN STD 2ND MATERIAL RESPONSE OVERALL

TECHNICAL CHARACTERISTICS

SPRING FREE OUTSIDE DIAMETER	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
LOAD RATING	10.00 POUNDS MINIMUM AND 14.00 POUNDS MAXIMUM LBS
END STYLE	MACHINE LOOP SECOND END
END STYLE	MACHINE CUT-OFF FIRST END
DESIGN TYPE	CLOSED
STYLE DESIGNATOR	CYLINDRICAL
OPENING WIDTH	0.220 INCHES MINIMUM SECOND END IN
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A227-41 ASSN STD 1ST MATERIAL RESPONSE OR ASTM 229-41 ASSN STD 2ND MATERIAL RESPONSE OVERALL
SPRING DEFLECTION RATE	65.300 POUNDS PER INCH NOMINAL LBS
COIL TO HOOK INSIDE LENGTH	0.406 INCHES MINIMUM SECOND END IN

SUBSTITUTES & CROSS-REFERENCES 1

310959Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 5360PL0545131?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5360PL0545131?

5360PL0545131 is a SPRING,HELICAL,EXTENSION.

What parts can replace 5360PL0545131?

There is 1 known substitute for 5360PL0545131: 310959. Substitute compatibility should be verified for your specific system.

What is the NSN for 5360PL0545131?

5360PL0545131 is cataloged in the U.S. Government catalog under NSN 5360-00-876-8557. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5360PL0545131 — SPRING,HELICAL,EXTENSION

Request a Quote — 5360PL0545131