310959: DISK DRIVE UNIT.
DAKER DK PLUS - On - line double conversion UPS (rack/tower) - single phase and three phase VFI - The main parameters of the UPS, including the battery charge level and faults, are displayed on the LCD screen on the front panel - The integrated communication software not only controls the UPS and its switch - off if there is a malfunction, and enables the user to test the main functions remotely, communicate via SNMP/Internet/network adaptor and access the functions of the UPS via the Internet, but can also send the user an SMS if specific events occur - The internal extension connector enables aWEB/SNMP card or a relay interface to be installed which provides insulated contacts for applications on industrial control panels or remote alarm panels - If there is an electronic fault, overload, overheating or for scheduled maintenance operations, the automatic or manual (optional) bypass ensures continuity of the power supply for critical loads. A bypass switch is available for maintenance This part is cataloged in the U.S. Government catalog under NSN 5360-00-876-8557, indicating validated use in U.S.
government and defense logistics supply chains.
| end_style | MACHINE CUT-OFF FIRST END |
| design_type | CLOSED |
| hook_radius | 0.120 INCHES NOMINAL SECOND END IN |
| load_rating | 10.00 POUNDS MINIMUM AND 14.00 POUNDS MAXIMUM LBS |
| coil_quantity | 11 |
| opening_width | 0.220 INCHES MINIMUM SECOND END IN |
| overall_width | 4.010 INCHES MAXIMUM IN |
| overall_height | 1.030 INCHES MAXIMUM IN |
| overall_length | 5.790 INCHES MAXIMUM IN |
| inside_diameter | 0.257 INCHES NOMINAL IN |
| special_features | SHALL HAVE A SERIAL ATA INTERFACE WHICH USES A 7 PIN SINGLE CONNECTOR; OPERATING TEMPERATURE RANGE: 5 TO 50 DEG CELCIUS |
| style_designator | CYLINDRICAL |
| NSN | 5360-00-876-8557 |
| SPRING FREE OUTSIDE DIAMETER | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN |
| LOAD RATING | 10.00 POUNDS MINIMUM AND 14.00 POUNDS MAXIMUM LBS |
| END STYLE | MACHINE LOOP SECOND END |
| END STYLE | MACHINE CUT-OFF FIRST END |
| DESIGN TYPE | CLOSED |
| STYLE DESIGNATOR | CYLINDRICAL |
| OPENING WIDTH | 0.220 INCHES MINIMUM SECOND END IN |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A227-41 ASSN STD 1ST MATERIAL RESPONSE OR ASTM 229-41 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| SPRING DEFLECTION RATE | 65.300 POUNDS PER INCH NOMINAL LBS |
| COIL TO HOOK INSIDE LENGTH | 0.406 INCHES MINIMUM SECOND END IN |