PartsTable
Technical Data Sheet
Download PDF

5342PL0728979 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5342PL0728979: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.344 INCHES NOMINAL IN, material: RUBBER SYNTHETIC CUSHION, overall_width: 0.562 INCHES NOMINAL IN, style_designator: SINGLE LOOP, surface_treatment: CADMIUM OR ZINC BAND, material_thickness: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-057-3052, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5342PL0728979
NSN: 5340-00-057-3052
FSC: 5340 — Hardware, Commercial
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
diameter0.344 INCHES NOMINAL IN
materialRUBBER SYNTHETIC CUSHION
overall_width0.562 INCHES NOMINAL IN
style_designatorSINGLE LOOP
surface_treatmentCADMIUM OR ZINC BAND
material_thickness0.032 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
end_item_identificationMRAP - COUGAR
distance_from_loop_center_to_tongue_end1.187 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.906 INCHES NOMINAL IN
NSN5340-00-057-3052
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5342PL0728979 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.344 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.032 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.187 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OR ZINC BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.906 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.344 INCHES NOMINAL IN
OVERALL WIDTH0.562 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.187 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC BAND
END ITEM IDENTIFICATIONMRAP - COUGAR
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.906 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC CUSHION
MATERIALSTEEL COMP 1005 OR STEEL COMP 1006 OR STEEL COMP 1008 OR STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1020 BAND
SUBSTITUTES & CROSS-REFERENCES 4
MS21333-114Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASM21333Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
5340000573052Reference document
Same NSN cross-reference
Reference document — Informative reference only
LS1091000-114Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5342PL0728979?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5342PL0728979?
5342PL0728979 is a CLAMP,LOOP.
What parts can replace 5342PL0728979?
There are 4 known substitutes for 5342PL0728979: MS21333-114, NASM21333, 5340000573052 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5342PL0728979?
5342PL0728979 is cataloged in the U.S. Government catalog under NSN 5340-00-057-3052. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5342PL0728979