PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL2220344
5340PL2220344 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: STEEL COMP 1020 OR STEEL COMP 1025 BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CADMIUM BAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-193-0101, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL2220344
NSN: 5340-00-193-0101
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialSTEEL COMP 1020 OR STEEL COMP 1025 BAND
overall_width0.375 INCHES NOMINAL IN
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCADMIUM BAND
material_thickness0.031 INCHES NOMINAL IN
loop_inside_diameter0.563 INCHES NOMINAL IN
material_document_and_classificationMIL0S07952 MIL SPEC ALL MATERIAL RESPONSES BAND
distance_from_loop_center_to_tongue_end0.750 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.563 INCHES NOMINAL IN
NSN5340-00-193-0101
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL2220344 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.563 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.031 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.563 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1020 OR STEEL COMP 1025 BAND
•
SURFACE TREATMENT: CADMIUM BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL0S07952 MIL SPEC ALL MATERIAL RESPONSES BAND
•
STYLE DESIGNATOR: CENTER MOUNT
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.563 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.563 INCHES NOMINAL IN
MATERIAL THICKNESS0.031 INCHES NOMINAL IN
MATERIALSTEEL COMP 1020 OR STEEL COMP 1025 BAND
SURFACE TREATMENTCADMIUM BAND
MATERIAL DOCUMENT AND CLASSIFICATIONMIL0S07952 MIL SPEC ALL MATERIAL RESPONSES BAND
STYLE DESIGNATORCENTER MOUNT
OVERALL WIDTH0.375 INCHES NOMINAL IN
DIAMETER0.204 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
AN735-9Upgraded Successor
successor cross-reference
successor
SAE-AS7351Upgraded Successor
successor cross-reference
successor
AS7351-38Upgraded Successor
successor cross-reference
successor
SAE-AS25281Upgraded Successor
successor cross-reference
successor
MS25281-F5Upgraded Successor
successor cross-reference
successor
AN735DC24Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL2220344?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL2220344?
5340PL2220344 is a CLAMP,LOOP.
What parts can replace 5340PL2220344?
There are 7 known substitutes for 5340PL2220344: AN735-9, SAE-AS7351, AS7351-38 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL2220344?
5340PL2220344 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-193-0101. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL2220344

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026