Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC, POLYETHYLENE (PP), length_under_shoulder: 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN, open_end_inside_diameter: 0.288 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN, closed_end_overall_diameter: 0.417 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN, material_document_and_classification: L-P-390, TYPE 1, CLASS L, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-026-3251, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
5340PL2149710
NSN:5340-01-026-3251 FSC:5340 CAGE:9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
material
PLASTIC, POLYETHYLENE (PP)
length_under_shoulder
0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
open_end_inside_diameter
0.288 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
closed_end_overall_diameter
0.417 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
material_document_and_classification
L-P-390, TYPE 1, CLASS L, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE
NSN
5340-01-026-3251
COMPONENT DIAGRAM
KEY FEATURES
•
OPEN END INSIDE DIAMETER: 0.288 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
LENGTH UNDER SHOULDER: 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
•
CLOSED END OVERALL DIAMETER: 0.417 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, CLASS L, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
OPEN END INSIDE DIAMETER
0.288 INCHES MINIMUM AND 0.308 INCHES MAXIMUM IN
MATERIAL
PLASTIC, POLYETHYLENE (PP)
LENGTH UNDER SHOULDER
0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
CLOSED END OVERALL DIAMETER
0.417 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
L-P-390, TYPE 1, CLASS L, GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL2149710?
5340PL2149710 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 5340PL2149710?
There are 25 known substitutes for 5340PL2149710: NAS847, MIL-C-5501/7, M5501/7-F24 and 22 more. Substitute compatibility should be verified for your specific system.
Is 5340PL2149710 still available?
5340PL2149710 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.