PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340PL1731414
5340PL1731414 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, surface_treatment: CHROMATE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-186-3389, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL1731414
NSN: 5340-00-186-3389
FSC: 5340
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
diameter0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
surface_treatmentCHROMATE BAND
material_thickness0.0295 INCHES MINIMUM AND 0.0345 INCHES MAXIMUM IN
loop_inside_diameter0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
material_document_and_classificationQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.765 INCHES MINIMUM AND 0.795 INCHES MAXIMUM IN
surface_treatment_document_and_classificationMIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE BAND A
center_to_center_distance_between_loop_and_mounting_hole0.577 INCHES MINIMUM AND 0.607 INCHES MAXIMUM IN
NSN5340-00-186-3389
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL1731414 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.765 INCHES MINIMUM AND 0.795 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 2024 BAND
•
DIAMETER: 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CHROMATE BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.765 INCHES MINIMUM AND 0.795 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 2024 BAND
DIAMETER0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM IN
SURFACE TREATMENTCHROMATE BAND
DISTANCE FROM LOOP CENTER TO TONGUE END0.765 INCHES MINIMUM AND 0.795 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE BAND
OVERALL WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
STYLE DESIGNATORSINGLE LOOP
SURFACE TREATMENTCHROMATE BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
6739844-17Upgraded Successor
successor cross-reference
successor
C8603ANDTYPE1ANDCLASSAUpgraded Successor
successor cross-reference
successor
24CUpgraded Successor
successor cross-reference
successor
754-22-2-8Upgraded Successor
successor cross-reference
successor
5340007269322Upgraded Successor
successor cross-reference
successor
7598Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340PL1731414?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL1731414?
5340PL1731414 is a CLAMP,LOOP.
What parts can replace 5340PL1731414?
There are 21 known substitutes for 5340PL1731414: 6739844-17, C8603ANDTYPE1ANDCLASSA, 24C and 18 more. Substitute compatibility should be verified for your specific system.
Is 5340PL1731414 still available?
5340PL1731414 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL1731414

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026