PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6739844-17
6739844-17 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, material: ALUMINUM ALLOY 2024 BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: OFFSET MOUNT, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-598-0473, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6739844-17
NSN: 5340-00-598-0473
FSC: 5340
CAGE: 73342 — ALLISON TRANSMISSION INC DBA ALLISON TRANSMISSION, INC (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
materialALUMINUM ALLOY 2024 BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorOFFSET MOUNT
tongue_hole_typeROUND, UNTHREADED
material_thickness0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
loop_inside_diameter1.048 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
nondefinitive_spec/std_data1 TYPE AND A CLASS
material_document_and_classificationQQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.146 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.928 INCHES NOMINAL IN
NSN5340-00-598-0473
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6739844-17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.928 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OFFSET MOUNT
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.146 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
MATERIAL THICKNESS: 0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.048 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.928 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET MOUNT
DISTANCE FROM LOOP CENTER TO TONGUE END1.146 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-362 FED SPEC SINGLE MATERIAL RESPONSE BAND
MATERIAL THICKNESS0.037 INCHES MINIMUM AND 0.043 INCHES MAXIMUM IN
DIAMETER0.204 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.048 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND A CLASS
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
5340PL0727323Upgraded Successor
successor cross-reference
successor
5340001863389Upgraded Successor
successor cross-reference
successor
AN742D50Upgraded Successor
successor cross-reference
successor
MIL-DTL-8603Upgraded Successor
successor cross-reference
successor
C8603ANDTYPE1ANDCLASSAUpgraded Successor
successor cross-reference
successor
AN742D64Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6739844-17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6739844-17?
6739844-17 is a CLAMP,LOOP.
What parts can replace 6739844-17?
There are 15 known substitutes for 6739844-17: 5340PL0727323, 5340001863389, AN742D50 and 12 more. Substitute compatibility should be verified for your specific system.
Is 6739844-17 still available?
6739844-17 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6739844-17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026