PartsTable
Technical Data Sheet
Download PDF

5340PL0571886 — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5340PL0571886: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, design_type: LOOP ENGAGING, hole_diameter: 0.167 INCHES NOMINAL IN, overall_width: 1.181 INCHES NOMINAL IN, overall_height: 0.787 INCHES NOMINAL IN, operation_method: LEVER ON OUTSIDE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-022-4071, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340PL0571886
NSN: 5340-01-022-4071
FSC: 5340 — Hardware, Commercial
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
materialSTEEL OVERALL
design_typeLOOP ENGAGING
hole_diameter0.167 INCHES NOMINAL IN
hole_quantity2
overall_width1.181 INCHES NOMINAL IN
overall_height0.787 INCHES NOMINAL IN
operation_methodLEVER ON OUTSIDE
style_designatorLEVER
surface_treatmentCADMIUM OVERALL
NSN5340-01-022-4071
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340PL0571886 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: LOOP ENGAGING
•
STYLE DESIGNATOR: LEVER
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE QUANTITY: 2
•
OPERATION METHOD: LEVER ON OUTSIDE
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.787 INCHES NOMINAL IN
DESIGN TYPELOOP ENGAGING
STYLE DESIGNATORLEVER
OVERALL WIDTH1.181 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
HOLE QUANTITY2
OPERATION METHODLEVER ON OUTSIDE
HOLE DIAMETER0.167 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
22203 28705Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
TL100AReference document
Same NSN cross-reference
Reference document — Secondary reference
91-452-08Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 5340PL0571886?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340PL0571886?
5340PL0571886 is a CATCH,CLAMPING.
What parts can replace 5340PL0571886?
There are 3 known substitutes for 5340PL0571886: 22203 28705, TL100A, 91-452-08. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340PL0571886?
5340PL0571886 is cataloged in the U.S. Government catalog under NSN 5340-01-022-4071. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340PL0571886

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.