91-452-08 — CATCH,CLAMPING

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

91-452-08: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, design_type: LOOP ENGAGING, hole_diameter: 0.167 INCHES NOMINAL IN, overall_width: 1.181 INCHES NOMINAL IN, overall_height: 0.787 INCHES NOMINAL IN, operation_method: LEVER ON OUTSIDE. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-310-6071, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

91-452-08

NSN: 5305-00-310-6071
NIINs: 003106071, 010224071
FSC: 5305 — Screws
CAGE: 58251 — FIRST AMERICAN SALES CO INC (USA)

SPECIFICATIONS

material	STEEL OVERALL
design_type	LOOP ENGAGING
hole_diameter	0.167 INCHES NOMINAL IN
hole_quantity	2
overall_width	1.181 INCHES NOMINAL IN
overall_height	0.787 INCHES NOMINAL IN
operation_method	LEVER ON OUTSIDE
style_designator	LEVER
surface_treatment	CADMIUM OVERALL
NSN	5305-00-310-6071

COMPONENT DIAGRAM

KEY FEATURES

•

FASTENER LENGTH: 0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE

•

THREAD LENGTH: 0.409 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.138 INCHES IN

•

HEAD STYLE: FLAT COUNTERSUNK

•

THREAD DIRECTION: RIGHT-HAND

•

SCREW MATERIAL: IRON ALLOY 660

•

MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH LBS

TECHNICAL CHARACTERISTICS

FASTENER LENGTH	0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH	0.409 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.138 INCHES IN
HEAD STYLE	FLAT COUNTERSUNK
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	IRON ALLOY 660
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM

SUBSTITUTES & CROSS-REFERENCES 4

965813-208CReference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

FS2003-06/208CSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

PBF1068-208CSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

E125-208Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 91-452-08?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 91-452-08?

91-452-08 is a CATCH,CLAMPING.

What parts can replace 91-452-08?

There are 4 known substitutes for 91-452-08: 965813-208C, FS2003-06/208C, PBF1068-208C and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 91-452-08?

91-452-08 is cataloged in the U.S. Government catalog under NSN 5305-00-310-6071. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

91-452-08 — CATCH,CLAMPING

Request a Quote — 91-452-08