PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340008071065
5340008071065 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, material: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL, overall_width: 0.495 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.085 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-807-1065, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340008071065
NSN: 5340-00-807-1065
FSC: 5340
CAGE: SCY13 — E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE
SPECIFICATIONS
diameter0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
materialPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
overall_width0.495 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.085 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
loop_inside_diameter0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
specification/standard_data81343-MS25281-R16 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
material_document_and_classificationASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_loop_center_to_tongue_end1.181 INCHES MINIMUM AND 1.271 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.916 INCHES MINIMUM AND 0.966 INCHES MAXIMUM IN
NSN5340-00-807-1065
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340008071065 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 81343-MS25281-R16 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.181 INCHES MINIMUM AND 1.271 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.916 INCHES MINIMUM AND 0.966 INCHES MAXIMUM IN
•
LOOP INSIDE DIAMETER: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIFICATION/STANDARD DATA81343-MS25281-R16 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TONGUE HOLE TYPEROUND, UNTHREADED
DISTANCE FROM LOOP CENTER TO TONGUE END1.181 INCHES MINIMUM AND 1.271 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.916 INCHES MINIMUM AND 0.966 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
MATERIAL THICKNESS0.085 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
DIAMETER0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
SAE-AS25281Upgraded Successor
successor cross-reference
successor
10117443Upgraded Successor
successor cross-reference
successor
9M843-2Upgraded Successor
successor cross-reference
successor
HP2NUpgraded Successor
successor cross-reference
successor
2994556-16Upgraded Successor
successor cross-reference
successor
MS25281R18Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340008071065?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340008071065?
5340008071065 is a CLAMP,LOOP.
What parts can replace 5340008071065?
There are 24 known substitutes for 5340008071065: SAE-AS25281, 10117443, 9M843-2 and 21 more. Substitute compatibility should be verified for your specific system.
Is 5340008071065 still available?
5340008071065 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340008071065

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026