PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340000887768
5340000887768 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN, material: PLASTIC POLYHEXAMETHYLENE AMIDE BAND, overall_width: 0.495 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, style_designator: SINGLE LOOP, material_thickness: 0.085 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, loop_inside_diameter: 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-088-7768, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340000887768
NSN: 5340-00-088-7768
FSC: 5340
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
diameter0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
materialPLASTIC POLYHEXAMETHYLENE AMIDE BAND
overall_width0.495 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
style_designatorSINGLE LOOP
material_thickness0.085 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
loop_inside_diameter0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
material_document_and_classificationMIL-M-20693 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.031 INCHES MINIMUM AND 1.171 INCHES MAXIMUM IN
center_to_center_distance_between_loop_and_mounting_hole0.791 INCHES MINIMUM AND 0.841 INCHES MAXIMUM IN
NSN5340-00-088-7768
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340000887768 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE BAND
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.031 INCHES MINIMUM AND 1.171 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
LOOP INSIDE DIAMETER: 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
•
DIAMETER: 0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.791 INCHES MINIMUM AND 0.841 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SINGLE LOOP
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE BAND
DISTANCE FROM LOOP CENTER TO TONGUE END1.031 INCHES MINIMUM AND 1.171 INCHES MAXIMUM IN
OVERALL WIDTH0.495 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-20693 MIL SPEC SINGLE MATERIAL RESPONSE BAND
LOOP INSIDE DIAMETER0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
DIAMETER0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.791 INCHES MINIMUM AND 0.841 INCHES MAXIMUM IN
STYLE DESIGNATORSINGLE LOOP
MATERIAL THICKNESS0.085 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
457-6209Upgraded Successor
successor cross-reference
successor
MS25281-F12Upgraded Successor
successor cross-reference
successor
10301187Upgraded Successor
successor cross-reference
successor
MS25281-F16Upgraded Successor
successor cross-reference
successor
SYMZ-70276 ITEM 3Upgraded Successor
successor cross-reference
successor
9M843-28Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340000887768?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340000887768?
5340000887768 is a CLAMP,LOOP.
What parts can replace 5340000887768?
There are 16 known substitutes for 5340000887768: 457-6209, MS25281-F12, 10301187 and 13 more. Substitute compatibility should be verified for your specific system.
Is 5340000887768 still available?
5340000887768 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340000887768

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026