PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5340-093-0001
5340-093-0001 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.172 INCHES NOMINAL IN, material: PLASTIC ETHYL CELLULOSE BAND, overall_width: 0.500 INCHES NOMINAL IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-245-3285, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5340-093-0001
NSN: 5340-01-245-3285
FSC: 5340
CAGE: 04614 — TEXTRON SYSTEMS CORPORATION DBA TEXTRON SYSTEMS CORP (USA)
SPECIFICATIONS
diameter0.172 INCHES NOMINAL IN
materialPLASTIC ETHYL CELLULOSE BAND
overall_width0.500 INCHES NOMINAL IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.062 INCHES NOMINAL IN
loop_inside_diameter0.312 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.671 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.453 INCHES NOMINAL IN
NSN5340-01-245-3285
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5340-093-0001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.312 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.453 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
MATERIAL: PLASTIC ETHYL CELLULOSE BAND
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
DIAMETER: 0.172 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.671 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.312 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.453 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE LOOP
MATERIALPLASTIC ETHYL CELLULOSE BAND
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
DIAMETER0.172 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.671 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
E5Upgraded Successor
successor cross-reference
successor
10688Upgraded Successor
successor cross-reference
successor
267508Interchangeable
interchangeable cross-reference
interchangeable
10015867-005Interchangeable
interchangeable cross-reference
interchangeable
GT4847Interchangeable
interchangeable cross-reference
interchangeable
0AKInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5340-093-0001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5340-093-0001?
5340-093-0001 is a CLAMP,LOOP.
What parts can replace 5340-093-0001?
There are 21 known substitutes for 5340-093-0001: E5, 10688, 267508 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5340-093-0001?
5340-093-0001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-245-3285. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5340-093-0001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026