PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 0AK
0AK ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include phase: SINGLE, lamp_type: INCANDESCENT, INSIDE FROST, platen_type: PRESSURE, current_type: AC/DC, printer_type: STILL, carrying_case: NOT PROVIDED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-8515, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
0AK
NSN: 3110-00-100-8515
FSC: 3110
CAGE: 60380 — TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT (USA)
SPECIFICATIONS
phaseSINGLE
lamp_typeINCANDESCENT, INSIDE FROST
platen_typePRESSURE
current_typeAC/DC
printer_typeSTILL
carrying_caseNOT PROVIDED
lamp_quantity4
mounting_typeTABLE
overall_width10.000 INCHES NOMINAL IN
overall_height13.000 INCHES NOMINAL IN
overall_length21.000 INCHES NOMINAL IN
voltage_rating110.0 VOLTS MINIMUM AND 120.0 VOLTS MAXIMUM
NSN3110-00-100-8515
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 0AK · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 1.4688 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
LARGEST BORE DIAMETER: 0.8125 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER1.4688 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
OVERALL HEIGHT0.5625 INCHES NOMINAL IN
LARGEST BORE DIAMETER0.8125 INCHES NOMINAL IN
SURFACE FINISHGROUND
SPECIAL FEATURESBANDED OD
STYLE DESIGNATORGROOVED RACE SURFACE, BANDED OD
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
267508Interchangeable
interchangeable cross-reference
interchangeable
E5Interchangeable
interchangeable cross-reference
interchangeable
D5Interchangeable
interchangeable cross-reference
interchangeable
NR50-872KInterchangeable
interchangeable cross-reference
interchangeable
504902-2Interchangeable
interchangeable cross-reference
interchangeable
8903-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 0AK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 0AK?
0AK is a RESISTOR,FIXED,COMPOSITION.
What parts can replace 0AK?
There are 25 known substitutes for 0AK: 267508, E5, D5 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 0AK?
0AK is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-8515. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 0AK

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026