The Cup,compression, cataloged under National Stock Number 5340-00-913-5480, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Tiffin Parts, L.l.c. Div Subsidiary of Pettibone Corp.. Government technical data includes 5 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-913-5480 |
| Primary Part Number | A24358-2 |
| Item Name | Cup,compression |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Tiffin Parts, L.l.c. Div Subsidiary of Pettibone Corp. |
| Status | ACTIVE |
| Feather Edge Angle | 30.0 DEGREES NOMINAL |
| Center Hole Diameter | 3.625 INCHES NOMINAL IN |
| Base Material Thickness | 0.219 INCHES NOMINAL IN |
| Material | COTTON AND RUBBER OVERALL |
| Recess Inside Diameter | 5.590 INCHES MINIMUM AND 5.595 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| A24358-2 PRIMARY | Tiffin Parts, L.l.c. Div Subsidiary of Pettibone Corp. (USA) |
| Reference | Meaning |
|---|---|
| A-24358-2 | C/1 Advisory reference — outside the item-of-supply concept Zf Industrieantriebe Witten Gmbh |
NSN 5340-00-913-5480 is a Cup,compression, manufactured by Tiffin Parts, L.l.c. Div Subsidiary of Pettibone Corp., classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-00-913-5480 has 1 manufacturer part number on file: A24358-2 (Tiffin Parts, L.l.c. Div Subsidiary of Pettibone Corp.).
Key specifications for A24358-2: Feather Edge Angle: 30.0 DEGREES NOMINAL; Overall Length: 1.000 INCHES NOMINAL IN; Center Hole Diameter: 3.625 INCHES NOMINAL IN; Base Material Thickness: 0.219 INCHES NOMINAL IN. 5 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.