PartsTable
Technical Data Sheet
Download PDF

A24358-2 — CUP,COMPRESSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A24358-2: CUP,COMPRESSION.

The CUP,COMPRESSION is a the manufacturer industrial component. Key specifications include material: COTTON AND RUBBER OVERALL, overall_length: 1.000 INCHES NOMINAL IN, feather_edge_angle: 30.0 DEGREES NOMINAL, center_hole_diameter: 3.625 INCHES NOMINAL IN, recess_inside_diameter: 5.590 INCHES MINIMUM AND 5.595 INCHES MAXIMUM IN, base_material_thickness: 0.219 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-913-5480, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A24358-2
NSN: 5340-00-913-5480
FSC: 5340 — Hardware, Commercial
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
materialCOTTON AND RUBBER OVERALL
overall_length1.000 INCHES NOMINAL IN
feather_edge_angle30.0 DEGREES NOMINAL
center_hole_diameter3.625 INCHES NOMINAL IN
recess_inside_diameter5.590 INCHES MINIMUM AND 5.595 INCHES MAXIMUM IN
base_material_thickness0.219 INCHES NOMINAL IN
NSN5340-00-913-5480
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A24358-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATHER EDGE ANGLE: 30.0 DEGREES NOMINAL
•
CENTER HOLE DIAMETER: 3.625 INCHES NOMINAL IN
•
BASE MATERIAL THICKNESS: 0.219 INCHES NOMINAL IN
•
MATERIAL: COTTON AND RUBBER OVERALL
•
RECESS INSIDE DIAMETER: 5.590 INCHES MINIMUM AND 5.595 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FEATHER EDGE ANGLE30.0 DEGREES NOMINAL
OVERALL LENGTH1.000 INCHES NOMINAL IN
CENTER HOLE DIAMETER3.625 INCHES NOMINAL IN
BASE MATERIAL THICKNESS0.219 INCHES NOMINAL IN
MATERIALCOTTON AND RUBBER OVERALL
RECESS INSIDE DIAMETER5.590 INCHES MINIMUM AND 5.595 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A24358-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A24358-2?
A24358-2 is a CUP,COMPRESSION.
What is the NSN for A24358-2?
A24358-2 is cataloged in the U.S. Government catalog under NSN 5340-00-913-5480. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A24358-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.