The Bracket,angle, cataloged under National Stock Number 5340-00-481-2297, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is General Electric Company. Government technical data includes 9 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-481-2297 |
| Primary Part Number | 1002M84P001A |
| Item Name | Bracket,angle |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | General Electric Company |
| Status | ACTIVE |
| First Leg Hole Diameter | 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN |
| First Leg Angle | 38.0 DEGREES NOMINAL |
| First Leg Distance Between Hole Centers Along Width | 1.656 INCHES NOMINAL IN |
| Second Leg Hole Diameter | 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN |
| First Leg Hole Arrangement Style | TWO HOLES |
| Style Designator | ANGLE |
| Material Document and Classification | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| Material | STEEL COMP 321 |
| Second Leg Hole Arrangement Style | ONE HOLE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| 1002M84P001A PRIMARY | General Electric Company (USA) |
NSN 5340-00-481-2297 is a Bracket,angle, manufactured by General Electric Company, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-00-481-2297 has 1 manufacturer part number on file: 1002M84P001A (General Electric Company).
Key specifications for 1002M84P001A: First Leg Hole Diameter: 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN; First Leg Angle: 38.0 DEGREES NOMINAL; First Leg Distance Between Hole Centers Along Width: 1.656 INCHES NOMINAL IN; Second Leg Hole Diameter: 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN. 9 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.