PartsTable
Technical Data Sheet
Download PDF

1002M84P001A — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1002M84P001A: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321, first_leg_angle: 38.0 DEGREES NOMINAL, style_designator: ANGLE, first_leg_hole_diameter: 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN, second_leg_hole_diameter: 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN, first_leg_hole_arrangement_style: TWO HOLES. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-481-2297, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1002M84P001A
NSN: 5340-00-481-2297
FSC: 5340 — Hardware, Commercial
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialSTEEL COMP 321
first_leg_angle38.0 DEGREES NOMINAL
style_designatorANGLE
first_leg_hole_diameter0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
second_leg_hole_diameter0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
first_leg_hole_arrangement_styleTWO HOLES
second_leg_hole_arrangement_styleONE HOLE
material_document_and_classificationAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
first_leg_distance_between_hole_centers_along_width1.656 INCHES NOMINAL IN
NSN5340-00-481-2297
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1002M84P001A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG HOLE DIAMETER: 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 38.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.656 INCHES NOMINAL IN
•
SECOND LEG HOLE DIAMETER: 0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
STYLE DESIGNATOR: ANGLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL: STEEL COMP 321
TECHNICAL CHARACTERISTICS
FIRST LEG HOLE DIAMETER0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
FIRST LEG ANGLE38.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.656 INCHES NOMINAL IN
SECOND LEG HOLE DIAMETER0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
STYLE DESIGNATORANGLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5510 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 321
SECOND LEG HOLE ARRANGEMENT STYLEONE HOLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1002M84P001A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1002M84P001A?
1002M84P001A is a BRACKET,ANGLE.
What is the NSN for 1002M84P001A?
1002M84P001A is cataloged in the U.S. Government catalog under NSN 5340-00-481-2297. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1002M84P001A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.