The Deflector,dirt and Liquid, cataloged under National Stock Number 5340-00-094-8633, is classified within Federal Supply Class 5340 (Hardware, Commercial) of the Hardware and Abrasives group. The manufacturer of record is Meggitt Troy Inc. Government technical data includes 14 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active. Unit of issue: EA.
| Parameter | Value |
|---|---|
| NSN | 5340-00-094-8633 |
| Primary Part Number | 130A0133 |
| Item Name | Deflector,dirt and Liquid |
| FSC / FSG | 5340 / 53 — Hardware, Commercial |
| Manufacturer | Meggitt Troy Inc |
| Status | ACTIVE |
| Mounting Hole Quantity | 2 |
| Distance From Taper to End | 0.032 INCHES NOMINAL IN |
| Angle Between Centerlines of Mounting Holes in Deg | 180.0 |
| Style Designator | ROUND, GROOVED |
| Groove Depth | 0.110 INCHES NOMINAL IN |
| Outside Diameter | 1.990 INCHES MINIMUM AND 1.994 INCHES MAXIMUM IN |
| Material Thickness | 0.218 INCHES NOMINAL IN |
| Inside Diameter | 1.437 INCHES NOMINAL IN |
| Bolt Circle Diameter | 1.593 INCHES NOMINAL IN |
| Surface Treatment | ANODIZE |
| Thread Class | 2B |
| Material | ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024 |
| Groove Width | 0.156 INCHES NOMINAL IN |
| Thread Size and Series/type Designator | 0.084-40 UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | Possible hazard — SDS may be required (DLA HMIC P) |
| Criticality Code | X |
| Unit of Issue | EA |
| Part Number | Manufacturer |
|---|---|
| 130A0133 PRIMARY | Meggitt Troy Inc (USA) |
NSN 5340-00-094-8633 is a Deflector,dirt and Liquid, manufactured by Meggitt Troy Inc, classified under FSC 5340, Hardware, Commercial. Status: active.
NSN 5340-00-094-8633 has 1 manufacturer part number on file: 130A0133 (Meggitt Troy Inc).
Key specifications for 130A0133: Mounting Hole Quantity: 2; Distance From Taper to End: 0.032 INCHES NOMINAL IN; Angle Between Centerlines of Mounting Holes in Deg: 180.0; Style Designator: ROUND, GROOVED. 14 specifications are documented in the U.S. Government catalog.
Possible hazard — SDS may be required (DLA HMIC P). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.