PartsTable
Technical Data Sheet
Download PDF

130A0133 — DEFLECTOR,DIRT AND LIQUID

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

130A0133: DEFLECTOR,DIRT AND LIQUID.

The DEFLECTOR,DIRT AND LIQUID is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024, groove_depth: 0.110 INCHES NOMINAL IN, groove_width: 0.156 INCHES NOMINAL IN, thread_class: 2B, inside_diameter: 1.437 INCHES NOMINAL IN, outside_diameter: 1.990 INCHES MINIMUM AND 1.994 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-094-8633, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
130A0133
NSN: 5340-00-094-8633
FSC: 5340 — Hardware, Commercial
CAGE: 78385 — MEGGITT TROY INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2024
groove_depth0.110 INCHES NOMINAL IN
groove_width0.156 INCHES NOMINAL IN
thread_class2B
inside_diameter1.437 INCHES NOMINAL IN
outside_diameter1.990 INCHES MINIMUM AND 1.994 INCHES MAXIMUM IN
style_designatorROUND, GROOVED
surface_treatmentANODIZE
material_thickness0.218 INCHES NOMINAL IN
bolt_circle_diameter1.593 INCHES NOMINAL IN
mounting_hole_quantity2
distance_from_taper_to_end0.032 INCHES NOMINAL IN
NSN5340-00-094-8633
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 130A0133 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
DISTANCE FROM TAPER TO END: 0.032 INCHES NOMINAL IN
•
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG: 180.0
•
STYLE DESIGNATOR: ROUND, GROOVED
•
GROOVE DEPTH: 0.110 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.990 INCHES MINIMUM AND 1.994 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.218 INCHES NOMINAL IN
•
INSIDE DIAMETER: 1.437 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
DISTANCE FROM TAPER TO END0.032 INCHES NOMINAL IN
ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG180.0
STYLE DESIGNATORROUND, GROOVED
GROOVE DEPTH0.110 INCHES NOMINAL IN
OUTSIDE DIAMETER1.990 INCHES MINIMUM AND 1.994 INCHES MAXIMUM IN
MATERIAL THICKNESS0.218 INCHES NOMINAL IN
INSIDE DIAMETER1.437 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER1.593 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 130A0133?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 130A0133?
130A0133 is a DEFLECTOR,DIRT AND LIQUID.
What is the NSN for 130A0133?
130A0133 is cataloged in the U.S. Government catalog under NSN 5340-00-094-8633. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 130A0133