PartsTable
Technical Data Sheet
Download PDF

5331PL0658562 — 5331PL0658562

✓ Government record, cited
JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX · ORING SEAL
PRODUCT OVERVIEW

5331PL0658562: 5331PL0658562.

The 5331PL0658562 is a JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX industrial component. This part is cataloged in the U.S. Government catalog under NSN 5331-01-457-5114, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5331PL0658562
NSN: 5331-01-457-5114
FSC: 5331 — O-ring
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
Part Number5331PL0658562
ManufacturerJEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX
NSN5331-01-457-5114
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5331PL0658562 MFR: JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -20.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83485 MIL SPEC SINGLE MATERIAL RESPONSE
•
SPECIFICATION/STANDARD DATA: 81349-MIL-R-83485/1 GOVERNMENT SPECIFICATION
•
CENTER HOLE DIAMETER: 1.284 INCHES MINIMUM AND 1.308 INCHES MAXIMUM IN
•
TEST DATA DOCUMENT: 81346-ASTM-D1414 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
TECHNICAL CHARACTERISTICS
TEMP RATING-20.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 80.0 SHORE DUROMETER A MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83485 MIL SPEC SINGLE MATERIAL RESPONSE
SPECIFICATION/STANDARD DATA81349-MIL-R-83485/1 GOVERNMENT SPECIFICATION
SPECIAL FEATURESIMPROVED PERFORMANCE AT LOW TEMPERATURES
CENTER HOLE DIAMETER1.284 INCHES MINIMUM AND 1.308 INCHES MAXIMUM IN
TEST DATA DOCUMENT81346-ASTM-D1414 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 7
AMS-R-83485/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
AMS-R-83485/1-219Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
5331PL1739395Reference document
Same NSN cross-reference
Reference document — Informative reference only
M83485/1-219Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MIL-R-83485/1Reference document
Same NSN cross-reference
Reference document — Secondary reference
ST1946-219Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5331PL0658562?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5331PL0658562?
5331PL0658562 is a 5331PL0658562 manufactured by JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX.
What parts can replace 5331PL0658562?
There are 7 known substitutes for 5331PL0658562: AMS-R-83485/1, AMS-R-83485/1-219, 5331PL1739395 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5331PL0658562?
5331PL0658562 is cataloged in the U.S. Government catalog under NSN 5331-01-457-5114. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5331PL0658562

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.