PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5330PL0162946
5330PL0162946 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include cut_type: DIAGONAL OVERALL, material: PLASTIC EPOXY AND PAPER OVERALL, joint_type: SCARF-PERIPHERAL RETAINER, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, peripheral_diameter: 1.064 INCHES MINIMUM AND 1.068 INCHES MAXIMUM IN, center_hole_diameter: 0.827 INCHES MINIMUM AND 0.829 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-582-2116, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5330PL0162946
NSN: 5330-00-582-2116
FSC: 5330
CAGE: 9009H — JEDNOLITY INDEKS MATERIALOWY - UNIFORM MATERIAL INDEX (POL)
SPECIFICATIONS
cut_typeDIAGONAL OVERALL
materialPLASTIC EPOXY AND PAPER OVERALL
joint_typeSCARF-PERIPHERAL RETAINER
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
peripheral_diameter1.064 INCHES MINIMUM AND 1.068 INCHES MAXIMUM IN
center_hole_diameter0.827 INCHES MINIMUM AND 0.829 INCHES MAXIMUM IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-582-2116
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5330PL0162946 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: PLASTIC EPOXY AND PAPER OVERALL
•
CENTER HOLE DIAMETER: 0.827 INCHES MINIMUM AND 0.829 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
JOINT TYPE: SCARF-PERIPHERAL RETAINER
•
CUT TYPE: DIAGONAL OVERALL
•
PERIPHERAL DIAMETER: 1.064 INCHES MINIMUM AND 1.068 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALPLASTIC EPOXY AND PAPER OVERALL
CENTER HOLE DIAMETER0.827 INCHES MINIMUM AND 0.829 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
JOINT TYPESCARF-PERIPHERAL RETAINER
CUT TYPEDIAGONAL OVERALL
PERIPHERAL DIAMETER1.064 INCHES MINIMUM AND 1.068 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
3001330Interchangeable
interchangeable cross-reference
interchangeable
2-211 N304-75Interchangeable
interchangeable cross-reference
interchangeable
MS28775-211Interchangeable
interchangeable cross-reference
interchangeable
5330PL0799362Interchangeable
interchangeable cross-reference
interchangeable
SAE-AS8791Interchangeable
interchangeable cross-reference
interchangeable
MS28774-211CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5330PL0162946?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5330PL0162946?
5330PL0162946 is a RETAINER,PACKING.
What parts can replace 5330PL0162946?
There are 11 known substitutes for 5330PL0162946: 3001330, 2-211 N304-75, MS28775-211 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5330PL0162946?
5330PL0162946 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-582-2116. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5330PL0162946

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026